Coaxial Servo System

Coaxial Servo System, can be widly used in injection machine.

Features of Coaxial Servo System

1. Save costs – Save coupling, connect seat cost, shorten assembly time.
   

2. Save space- With the same displacement, the coaxial motor pump reduces the volume by 25%-30% compared with the system using the connecting seat, which is more convenient for customers to install.
   

3. More reliable- There is no need to worry about oil pump and fault caused by coupling looseness, eccentricity or flatness error.

4. More efficient- Internal meshing gear pump in 2500RPM, noise up to 85 db above, in order to reduce the noise can only use 2000RPM, and coaxial motor pump in 2500RPM, noise is not higher than 80 dB, compared with the internal meshing gear pump in 2000RPM, more than 25% of the flow output.

5. More Stable- When the coaxial motor pump is used for injection molding, the pressure fluctuation is more stable. In low speed and high pressure molding, the injection pressure of 140Bar can be established at a speed of 3%
   

6. More energy-saving- The direct motion design reduces the mechanical loss and the high volume efficiency reduces the energy waste.

7. Easy maintenance- In case of vane pump failure, only need to replace the tank can restore the machine work, fast and convenient, low cost, effectively reduce customer complaints.

8. Easy to use- The working pressure of Servo vane pump is up to 280Bar, can be easily used for forging press, die casting machine and other high pressure equipment