Prìs reusanta Delta AC DC Servo Motor System Driver Controller VFD550vl43c-J
Tha sinn a’ creidsinn gu bheil com-pàirteachas abairt fada gu dearbh mar thoradh air mullach an raoin, taic luach-leasaichte, coinneachadh beairteach agus conaltradh pearsanta airson prìs reusanta Rianadair Dràibhear Siostam Motair Delta AC DC Servo VFD550vl43c-J, “A’ dèanamh thoraidhean agus fuasglaidhean de shàr chàileachd ” is dòcha gur e targaid shìorraidh ar companaidh.Bidh sinn a’ dèanamh oidhirpean gun stad gus an amas “Glèidhidh sinn gu tric ann an astar còmhla ris an ùine” a thuigsinn.
Tha sinn a’ creidsinn gu bheil com-pàirteachas faireachdainn fada mar thoradh dha-rìribh air mullach an raoin, taic luach-leasaichte, coinneachadh beairteach agus conaltradh pearsanta airsonRianadair motair Servo Sìona agus AC Servo Drive, Le barrachd air 9 bliadhna de eòlas agus sgioba sgileil, a-nis tha sinn air na stuthan againn às-mhalairt gu mòran dhùthchannan agus roinnean air feadh an t-saoghail.Tha sinn a’ cur fàilte air luchd-ceannach, comainn gnìomhachais agus caraidean bho gach ceàrnaidh den t-saoghal fios a chuir thugainn agus co-obrachadh a shireadh airson buannachdan dha chèile.
Clàr paramadair servo motor
| Meud | Nominaltorque | Rotor glaiste torque | Bun-luath | Astar as àirde | Ainmeil an-dràsta | Rotor glaiste torque | Cumhachd Ainmeil | Torqueconstat | Ainmeil Tricead | lùbach Resistance | lùbach Inductanle | Ainmeil Bholtaids | Interia le breic Opion | ||||
| Nm | Nm | Rpm | Rpm | Gàirdeanan | Gàirdeanan | KW | Nm/Arm | Hz | Ohm | mH | V | kgm210-3 | |||||
| U1004F.15.3 | 38 | 39 | 1500 | 1950 | 11.6 | 12 | 6 | 3.32 | 100 | 1.67 | 16.33 | 350 | 6 | ||||
| U1004F.17.3 | 38.9 | 40.4 | 1700 | 2150 | 15.2 | 15.8 | 7.6 | 2.81 | 113.4 | 1.19 | 16 | 381 | 6 | ||||
| U1004F.20.3 | 42 | 44 | 2000 | 2450 | 18.8 | 19.6 | 8.7 | 2.37 | 133.4 | 0.85 | 8.33 | 321 | 6 | ||||
| U1005F.15.3 | 55 | 60.7 | 1500 | 1950 | 16.6 | 20.2 | 8.6 | 3.31 | 100 | 0.97 | 14.6 | 300 | 6.1 | ||||
| U1005F.17.3 | 57 | 59.5 | 1700 | 2150 | 20.4 | 23.3 | 10 | 2.81 | 113.4 | 0.72 | 10.6 | 336 | 6.1 | ||||
| U1005F.20.3 | 58 | 60.7 | 2000 | 2450 | 24.3 | 25.7 | 12 | 2.6 | 133.4 | 0.6 | 9 | 364 | 6.1 | ||||
| U1007F.15.3 | 74 | 81.6 | 1500 | 1950 | 23.9 | 26.5 | 11.6 | 3.37 | 100 | 0.665 | 11.4 | 329 | 9 | ||||
| U1007F.17.3 | 80 | 83 | 1700 | 2150 | 28.2 | 31.8 | 14 | 2.85 | 113.4 | 0.48 | 8.09 | 341 | 9 | ||||
| U1007F.20.3 | 87 | 92 | 2000 | 2450 | 36.7 | 38.3 | 18.2 | 2.53 | 133.4 | 0.356 | 4.74 | 341 | 9 | ||||
| U1008F.15.3 | 103 | 106.1 | 1500 | 1950 | 33.2 | 34.6 | 16.4 | 3.38 | 100 | 0.473 | 9.05 | 370 | 9.8 | ||||
| U1008F.17.3 | 96.2 | 99.6 | 1700 | 2150 | 35.1 | 36.8 | 17.6 | 2.98 | 113.4 | 0.417 | 7.04 | 370 | 9.8 | ||||
| U1008F.20.3 | 95.6 | 99.6 | 2000 | 2450 | 40.1 | 42.5 | 20.4 | 2.58 | 133.4 | 0.314 | 5.29 | 370 | 9.8 | ||||
| U1010F.15.3 | 128 | 130.2 | 1500 | 1950 | 41 | 42.9 | 20 | 3.3 | 100 | 0.338 | 7.38 | 360 | 12 | ||||
| U1010F.17.3 | 122 | 126.6 | 1800 | 2250 | 44 | 48.7 | 23 | 2.87 | 120 | 0.273 | 5.42 | 312 | 12 | ||||
| U1010F.20.3 | 135 | 139 | 2000 | 2450 | 60.5 | 61.8 | 28.3 | 2.37 | 133.4 | 0.181 | 2.78 | 321 | 12 | ||||
| U1013F.15.3 | 186 | 190 | 1500 | 1950 | 61 | 63.8 | 29 | 3.26 | 100 | 0.249 | 3.7 | 370 | 15 | ||||
| U1013F.17.3 | 164.1 | 169.5 | 1700 | 2150 | 55.4 | 58.5 | 28.7 | 3.19 | 113.4 | 0.236 | 5.03 | 380 | 15 | ||||
| U1013F.20.3 | 175 | 185 | 2000 | 2450 | 73.7 | 77.3 | 36.7 | 2.53 | 133.4 | 0. 144 | 2.37 | 340 | 15 | ||||
| U1015F.15.3 | 220 | 225 | 1500 | 2000 | 72.73 | 80.93 | 37 | 3.096 | 100 | 0.18 | 4.029 | 370 | 19 | ||||
| U1015F.20.3 | 215 | 223 | 2000 | 2500 | 96 | 106.8 | 49 | 2. 322 | 133.4 | 0.103 | 2.266 | 371 | 19 | ||||
| U1315F.15.3 | 196 | 198 | 1500 | 2000 | 71.48 | 72.51 | 31 | 3.015 | 100 | 0.169 | 6.458 | 378 | 27 | ||||
| U1315F.20.3 | 191 | 196 | 2000 | 2500 | 97.76 | 100.2 | 43 | 2. 154 | 133 | 0.089 | 3.295 | 380 | 27 | ||||
| U1320F.15.3 | 210 | 210 | 1500 | 1950 | 62 | 62 | 33 | 3.43 | 100 | 0.098 | 4.46 | 369 | 36 | ||||
| U1320F.17.3 | 229 | 236 | 1700 | 2150 | 92.6 | 98.3 | 39.4 | 2.94 | 113.4 | 0.107 | 4.5 | 377 | 36 | ||||
| U1320F.18.3 | 232 | 240 | 1800 | 2250 | 96.46 | 99.8 | 44 | 2.64 | 120 | 0.085 | 3.647 | 379 | 36 | ||||
| U1320F.20.3 | 269 | 286 | 2000 | 2450 | 120.7 | 127.8 | 56.3 | 2.37 | 133.4 | 0.068 | 2.13 | 347 | 36 | ||||
| U1330F.15.3 | 380 | 416 | 1500 | 1950 | 106 | 117 | 60 | 3.56 | 100 | 0.082 | 3.19 | 280 | 49 | ||||
| U1330F.17.3 | 349 | 363 | 1700 | 2150 | 145 | 153.4 | 62 | 2.89 | 113 | 0.06 | 2.9 | 268 | 49 | ||||
| U1330F.20.3 | 389 | 417 | 2000 | 2450 | 155 | 166 | 81 | 2.67 | 133 | 0.046 | 1.8 | 286 | 49 | ||||
Nota: 1. Max.astar: Mura cleachd thu an gnìomh smachd lagachadh lìon, bidh an astar rotagig as àirde nas àirde na 500 rpm na an astar comharraichte.Ma chleachdas tu an gnìomh smachd lagachaidh lìn, bidh an ìre as àirde.tha astar rotatig an urra ris an driue.
2. Àireamh pòla: Is e an àireamh pòla 8 rooles fr os cionn, is e 4 paidhrichean slata a th’ ann.
Meud an stàlaidh:
Bidh dealgan an motair a’ cleachdadh an axis copach àbhaisteach no le axis aon-cheangail.Cruth splined a-staigh splined splined taobh a-muigh no cas lag.Bidh an comharra de encoder taobh a-staigh bogsa snaim motair a’ cleachdadh bòrd PCB, faodaidh e cuideachd socaid adhair a thaghadh.Faodaidh an stàladh motair flange no baseplate a thaghadh.
