Cliù àrd Sìona Minrry AC Servo Motor Control Trainer Innealan Dealain Uidheam Dealain
Tha an companaidh againn ag amas air a bhith ag obair gu dìleas, a’ frithealadh ar luchd-ceannach gu lèir, agus ag obair ann an teicneòlas ùr agus inneal ùr gu cunbhalach airson Àrd chliù Sìona Minrry AC Servo Motor Control Trainer Innealan Dealain Uidheam Dealain, Is e ar rùn “làr ùr a’ spreadhadh, Passing Value”, san àm ri teachd, tha sinn gu dùrachdach a’ toirt cuireadh dhut a thighinn air adhart gu cinnteach còmhla rinn agus fad-ùine gleansach a dhèanamh còmhla!
Tha ar companaidh ag amas air a bhith ag obair gu dìleas, a 'frithealadh ar luchd-ceannach air fad, agus ag obair ann an teicneòlas ùr agus inneal ùr gu cunbhalach airsonUidheam Foghlaim Sìona airson Oilthigh, Uidheam Foghlaim, Tha sinn a 'cur fàilte oirbh tadhal air a' chompanaidh agus an fhactaraidh againn.Tha e cuideachd goireasach tadhal air an làrach-lìn againn.Bheir an sgioba reic againn an t-seirbheis as fheàrr dhut.Ma tha feum agad air tuilleadh fiosrachaidh, bi cinnteach gum bi thu di-beathte fios a chuir thugainn air post-d no fòn.Tha sinn air a bhith gu dùrachdach an dòchas deagh dhàimh gnìomhachais fad-ùine a stèidheachadh leat tron chothrom seo, stèidhichte air buannachd cho-ionann, bho seo gu àm ri teachd.
Clàr paramadair servo motor
| Meud | Nominaltorque | Rotor glaiste torque | Bun-luath | Astar as àirde | Ainmeil an-dràsta | Rotor glaiste torque | Cumhachd Ainmeil | Torqueconstat | Ainmeil Tricead | lùbach Resistance | lùbach Inductanle | Ainmeil Bholtaids | Interia le breic Opion | ||||
| Nm | Nm | Rpm | Rpm | Gàirdeanan | Gàirdeanan | KW | Nm/Arm | Hz | Ohm | mH | V | kgm210-3 | |||||
| U1004F.15.3 | 38 | 39 | 1500 | 1950 | 11.6 | 12 | 6 | 3.32 | 100 | 1.67 | 16.33 | 350 | 6 | ||||
| U1004F.17.3 | 38.9 | 40.4 | 1700 | 2150 | 15.2 | 15.8 | 7.6 | 2.81 | 113.4 | 1.19 | 16 | 381 | 6 | ||||
| U1004F.20.3 | 42 | 44 | 2000 | 2450 | 18.8 | 19.6 | 8.7 | 2.37 | 133.4 | 0.85 | 8.33 | 321 | 6 | ||||
| U1005F.15.3 | 55 | 60.7 | 1500 | 1950 | 16.6 | 20.2 | 8.6 | 3.31 | 100 | 0.97 | 14.6 | 300 | 6.1 | ||||
| U1005F.17.3 | 57 | 59.5 | 1700 | 2150 | 20.4 | 23.3 | 10 | 2.81 | 113.4 | 0.72 | 10.6 | 336 | 6.1 | ||||
| U1005F.20.3 | 58 | 60.7 | 2000 | 2450 | 24.3 | 25.7 | 12 | 2.6 | 133.4 | 0.6 | 9 | 364 | 6.1 | ||||
| U1007F.15.3 | 74 | 81.6 | 1500 | 1950 | 23.9 | 26.5 | 11.6 | 3.37 | 100 | 0.665 | 11.4 | 329 | 9 | ||||
| U1007F.17.3 | 80 | 83 | 1700 | 2150 | 28.2 | 31.8 | 14 | 2.85 | 113.4 | 0.48 | 8.09 | 341 | 9 | ||||
| U1007F.20.3 | 87 | 92 | 2000 | 2450 | 36.7 | 38.3 | 18.2 | 2.53 | 133.4 | 0.356 | 4.74 | 341 | 9 | ||||
| U1008F.15.3 | 103 | 106.1 | 1500 | 1950 | 33.2 | 34.6 | 16.4 | 3.38 | 100 | 0.473 | 9.05 | 370 | 9.8 | ||||
| U1008F.17.3 | 96.2 | 99.6 | 1700 | 2150 | 35.1 | 36.8 | 17.6 | 2.98 | 113.4 | 0.417 | 7.04 | 370 | 9.8 | ||||
| U1008F.20.3 | 95.6 | 99.6 | 2000 | 2450 | 40.1 | 42.5 | 20.4 | 2.58 | 133.4 | 0.314 | 5.29 | 370 | 9.8 | ||||
| U1010F.15.3 | 128 | 130.2 | 1500 | 1950 | 41 | 42.9 | 20 | 3.3 | 100 | 0.338 | 7.38 | 360 | 12 | ||||
| U1010F.17.3 | 122 | 126.6 | 1800 | 2250 | 44 | 48.7 | 23 | 2.87 | 120 | 0.273 | 5.42 | 312 | 12 | ||||
| U1010F.20.3 | 135 | 139 | 2000 | 2450 | 60.5 | 61.8 | 28.3 | 2.37 | 133.4 | 0.181 | 2.78 | 321 | 12 | ||||
| U1013F.15.3 | 186 | 190 | 1500 | 1950 | 61 | 63.8 | 29 | 3.26 | 100 | 0.249 | 3.7 | 370 | 15 | ||||
| U1013F.17.3 | 164.1 | 169.5 | 1700 | 2150 | 55.4 | 58.5 | 28.7 | 3.19 | 113.4 | 0.236 | 5.03 | 380 | 15 | ||||
| U1013F.20.3 | 175 | 185 | 2000 | 2450 | 73.7 | 77.3 | 36.7 | 2.53 | 133.4 | 0. 144 | 2.37 | 340 | 15 | ||||
| U1015F.15.3 | 220 | 225 | 1500 | 2000 | 72.73 | 80.93 | 37 | 3.096 | 100 | 0.18 | 4.029 | 370 | 19 | ||||
| U1015F.20.3 | 215 | 223 | 2000 | 2500 | 96 | 106.8 | 49 | 2. 322 | 133.4 | 0.103 | 2.266 | 371 | 19 | ||||
| U1315F.15.3 | 196 | 198 | 1500 | 2000 | 71.48 | 72.51 | 31 | 3.015 | 100 | 0.169 | 6.458 | 378 | 27 | ||||
| U1315F.20.3 | 191 | 196 | 2000 | 2500 | 97.76 | 100.2 | 43 | 2. 154 | 133 | 0.089 | 3.295 | 380 | 27 | ||||
| U1320F.15.3 | 210 | 210 | 1500 | 1950 | 62 | 62 | 33 | 3.43 | 100 | 0.098 | 4.46 | 369 | 36 | ||||
| U1320F.17.3 | 229 | 236 | 1700 | 2150 | 92.6 | 98.3 | 39.4 | 2.94 | 113.4 | 0.107 | 4.5 | 377 | 36 | ||||
| U1320F.18.3 | 232 | 240 | 1800 | 2250 | 96.46 | 99.8 | 44 | 2.64 | 120 | 0.085 | 3.647 | 379 | 36 | ||||
| U1320F.20.3 | 269 | 286 | 2000 | 2450 | 120.7 | 127.8 | 56.3 | 2.37 | 133.4 | 0.068 | 2.13 | 347 | 36 | ||||
| U1330F.15.3 | 380 | 416 | 1500 | 1950 | 106 | 117 | 60 | 3.56 | 100 | 0.082 | 3.19 | 280 | 49 | ||||
| U1330F.17.3 | 349 | 363 | 1700 | 2150 | 145 | 153.4 | 62 | 2.89 | 113 | 0.06 | 2.9 | 268 | 49 | ||||
| U1330F.20.3 | 389 | 417 | 2000 | 2450 | 155 | 166 | 81 | 2.67 | 133 | 0.046 | 1.8 | 286 | 49 | ||||
Nota: 1. Max.astar: Mura cleachd thu an gnìomh smachd lagachadh lìon, bidh an astar rotagig as àirde nas àirde na 500 rpm na an astar comharraichte.Ma chleachdas tu an gnìomh smachd lagachaidh lìn, bidh an ìre as àirde.tha astar rotatig an urra ris an driue.
2. Àireamh pòla: Is e an àireamh pòla 8 rooles fr os cionn, is e 4 paidhrichean slata a th’ ann.
Meud an stàlaidh:
Bidh dealgan an motair a’ cleachdadh an axis copach àbhaisteach no le axis aon-cheangail.Cruth splined a-staigh splined splined taobh a-muigh no cas lag.Bidh an comharra de encoder taobh a-staigh bogsa snaim motair a’ cleachdadh bòrd PCB, faodaidh e cuideachd socaid adhair a thaghadh.Faodaidh an stàladh motair flange no baseplate a thaghadh.
