100% Factaraidh tùsail Sìona Dorna Àrd-choileanadh AC Servo Motor 5.5kw 180mm 380V
Tha ar companaidh ag amas air a bhith ag obair gu dìleas, a 'frithealadh ar luchd-ceannach air fad, agus ag obair ann an teicneòlas ùr agus inneal ùr gu cunbhalach airson 100% Original Factory Sìona Dorna Àrd-choileanadhAC ServoMotor 5.5kw 180mm 380V, Gus dùilean a thabhann le uidheamachd agus fuasglaidhean sgoinneil, agus gu tric is e inneal ùr a leasachadh amasan gnìomhachais a ’chompanaidh againn. Bheir sinn sùil air adhart airson do cho-obrachadh.
Tha a’ chompanaidh againn ag amas air a bhith ag obair gu dìleas, a’ frithealadh don luchd-ceannach againn uile, agus ag obair ann an teicneòlas ùr agus inneal ùr gu cunbhalach airsonAC Servo, Servo Sìona, An-dràsta tha ar lìonra reic a 'sìor fhàs, a' leasachadh càileachd seirbheis gus coinneachadh ri iarrtas luchd-cleachdaidh. Ma tha ùidh agad ann am fuasglaidhean sam bith, bu chòir dhut fios a chuir thugainn aig àm sam bith. Tha sinn a’ coimhead air adhart ri bhith a’ cruthachadh dhàimhean gnìomhachais soirbheachail leat a dh’ aithghearr.
Clàr paramadair servo motor
Meud | Ainmear altair | Rotor glaiste torque | Bunait peed | As àirde Luas | Ainmear l An-dràsta | Rotor glaiste torque | Ainmear l Cumhachd | Torc constat | Ainmeil Tricead | lùbach Resistance | lùbach Inductanle | Ainmeil Bholtaids | Interia le breic Opion | ||||
Nm | Nm | Rpm | Rpm | Gàirdeanan | Gàirdeanan | KW | Nm/Arm | Hz | Ohm | mH | V | kgm210-3 | |||||
U1004F.15.3 | 38 | 39 | 1500 | 1950 | 11.6 | 12 | 6 | 3.32 | 100 | 1.67 | 16.33 | 350 | 6 | ||||
U1004F.17.3 | 38.9 | 40.4 | 1700 | 2150 | 15.2 | 15.8 | 7.6 | 2.81 | 113.4 | 1.19 | 16 | 381 | 6 | ||||
U1004F.20.3 | 42 | 44 | 2000 | 2450 | 18.8 | 19.6 | 8.7 | 2.37 | 133.4 | 0.85 | 8.33 | 321 | 6 | ||||
U1005F.15.3 | 55 | 60.7 | 1500 | 1950 | 16.6 | 20.2 | 8.6 | 3.31 | 100 | 0.97 | 14.6 | 300 | 6.1 | ||||
U1005F.17.3 | 57 | 59.5 | 1700 | 2150 | 20.4 | 23.3 | 10 | 2.81 | 113.4 | 0.72 | 10.6 | 336 | 6.1 | ||||
U1005F.20.3 | 58 | 60.7 | 2000 | 2450 | 24.3 | 25.7 | 12 | 2.6 | 133.4 | 0.6 | 9 | 364 | 6.1 | ||||
U1007F.15.3 | 74 | 81.6 | 1500 | 1950 | 23.9 | 26.5 | 11.6 | 3.37 | 100 | 0.665 | 11.4 | 329 | 9 | ||||
U1007F.17.3 | 80 | 83 | 1700 | 2150 | 28.2 | 31.8 | 14 | 2.85 | 113.4 | 0.48 | 8.09 | 341 | 9 | ||||
U1007F.20.3 | 87 | 92 | 2000 | 2450 | 36.7 | 38.3 | 18.2 | 2.53 | 133.4 | 0.356 | 4.74 | 341 | 9 | ||||
U1008F.15.3 | 103 | 106.1 | 1500 | 1950 | 33.2 | 34.6 | 16.4 | 3.38 | 100 | 0.473 | 9.05 | 370 | 9.8 | ||||
U1008F.17.3 | 96.2 | 99.6 | 1700 | 2150 | 35.1 | 36.8 | 17.6 | 2.98 | 113.4 | 0.417 | 7.04 | 370 | 9.8 | ||||
U1008F.20.3 | 95.6 | 99.6 | 2000 | 2450 | 40.1 | 42.5 | 20.4 | 2.58 | 133.4 | 0.314 | 5.29 | 370 | 9.8 | ||||
U1010F.15.3 | 128 | 130.2 | 1500 | 1950 | 41 | 42.9 | 20 | 3.3 | 100 | 0.338 | 7.38 | 360 | 12 | ||||
U1010F.17.3 | 122 | 126.6 | 1800 | 2250 | 44 | 48.7 | 23 | 2.87 | 120 | 0.273 | 5.42 | 312 | 12 | ||||
U1010F.20.3 | 135 | 139 | 2000 | 2450 | 60.5 | 61.8 | 28.3 | 2.37 | 133.4 | 0.181 | 2.78 | 321 | 12 | ||||
U1013F.15.3 | 186 | 190 | 1500 | 1950 | 61 | 63.8 | 29 | 3.26 | 100 | 0.249 | 3.7 | 370 | 15 | ||||
U1013F.17.3 | 164.1 | 169.5 | 1700 | 2150 | 55.4 | 58.5 | 28.7 | 3.19 | 113.4 | 0.236 | 5.03 | 380 | 15 | ||||
U1013F.20.3 | 175 | 185 | 2000 | 2450 | 73.7 | 77.3 | 36.7 | 2.53 | 133.4 | 0. 144 | 2.37 | 340 | 15 | ||||
U1015F.15.3 | 220 | 225 | 1500 | 2000 | 72.73 | 80.93 | 37 | 3.096 | 100 | 0.18 | 4.029 | 370 | 19 | ||||
U1015F.20.3 | 215 | 223 | 2000 | 2500 | 96 | 106.8 | 49 | 2. 322 | 133.4 | 0.103 | 2.266 | 371 | 19 | ||||
U1315F.15.3 | 196 | 198 | 1500 | 2000 | 71.48 | 72.51 | 31 | 3.015 | 100 | 0.169 | 6.458 | 378 | 27 | ||||
U1315F.20.3 | 191 | 196 | 2000 | 2500 | 97.76 | 100.2 | 43 | 2. 154 | 133 | 0.089 | 3.295 | 380 | 27 | ||||
U1320F.15.3 | 210 | 210 | 1500 | 1950 | 62 | 62 | 33 | 3.43 | 100 | 0.098 | 4.46 | 369 | 36 | ||||
U1320F.17.3 | 229 | 236 | 1700 | 2150 | 92.6 | 98.3 | 39.4 | 2.94 | 113.4 | 0.107 | 4.5 | 377 | 36 | ||||
U1320F.18.3 | 232 | 240 | 1800 | 2250 | 96.46 | 99.8 | 44 | 2.64 | 120 | 0.085 | 3.647 | 379 | 36 | ||||
U1320F.20.3 | 269 | 286 | 2000 | 2450 | 120.7 | 127.8 | 56.3 | 2.37 | 133.4 | 0.068 | 2.13 | 347 | 36 | ||||
U1330F.15.3 | 380 | 416 | 1500 | 1950 | 106 | 117 | 60 | 3.56 | 100 | 0.082 | 3.19 | 280 | 49 | ||||
U1330F.17.3 | 349 | 363 | 1700 | 2150 | 145 | 153.4 | 62 | 2.89 | 113 | 0.06 | 2.9 | 268 | 49 | ||||
U1330F.20.3 | 389 | 417 | 2000 | 2450 | 155 | 166 | 81 | 2.67 | 133 | 0.046 | 1.8 | 286 | 49 |
Nota: 1. Max. astar: Mura cleachd thu an gnìomh smachd lagachadh lìon, bidh an astar rotagig as àirde nas àirde na 500 rpm na an astar comharraichte. Ma chleachdas tu an gnìomh smachd lagachaidh lìn, bidh an ìre as àirde. tha astar rotatig an urra ris an driue.
2. Àireamh pòla: Is e an àireamh pòla 8 rooles fr os cionn, is e 4 paidhrichean slata a th’ ann.
Meud an stàlaidh:
Bidh dealgan an motair a’ cleachdadh an axis copach àbhaisteach no le axis aon-cheangail. Cruth splined a-staigh splined splined taobh a-muigh no cas lag. Bidh an comharra de encoder taobh a-staigh bogsa snaim motair a’ cleachdadh bòrd PCB, faodaidh e cuideachd socaid adhair a thaghadh. Faodaidh an stàladh motair flange no baseplate a thaghadh.