Factory wholesale T7 Series Single pumps to Croatia Manufacturers

Short Description:

High pressure and high performance dowel pin type vane pumps widely used for plastic machinery, casting machinery, metallurgy machinery, pressing machinery, refining machinery, construction machinery, marine-machinery. Features 1.With dowel pin vane structure, it can work in high pressure, low noise and long lifetime2.This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.3.As the vane pump adopts bilabial vane, it has hig...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Rotary Vane Pump And Motor, Hydraulic Pump Noise, Hydraulic Pump Yoke, "Quality", "honesty" and "service" is our principle. Our loyalty and commitments remain respectfully at your service. Contact Us Today For further information, contact us now.

Factory wholesale T7 Series Single pumps to Croatia Manufacturers Detail:

Features

1.With dowel pin vane structure, it can work in high pressure, low noise and long lifetime
2.This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.
3.As the vane pump adopts bilabial vane, it has high oil pollution resistance and wide speed scope.

NO.	Part	Qty	NO.	Part	Qty	NO.	Part	Qty
1	Shaft	1	5	Cir Clip For Shaft	2	9	Cartridge Kit	1
2	Straight Key	1	6	Ball Bearing	1	10	Rear Cover	1
3	Front Cover	1	7	Cir Clip For Hole	1	11	Hexagon Head Bolt	4
4	Shaft Seal	1	8	Rectangle Seal Ring	1

< Model Designation

T7B	S	-B10	-1	R	00	-A	1	01
Series	Type Code	Flow code	Shaft type	Rotation	Port positions	Design number	Sealing Level	Port dimensions
T7B	NO: ISO 3019 Installation Flange S: SAE J744 installation flange	B02、B03、B04、B05、 B06、B07、B08、B10、 B12、B15	See of shaft	(Views from shaft end of pump) R-right hand for clockwise L-left hand for counter-clockwise	(Views from shaft end of pump) 00-Opposite inlet port 01-Inline with inlet 02-90°CCW from inlet 03-90°CW from inlet	A	1-S1, NBR Nitrile rubber 5-S5, Fluororubber	See installation dimensions
T7D		B14、B17、B20、B22、 B24、B28、B31、B35、 B38、B42						NO
T7E		042、045、050、052、 054、057、062、066、 072、085
T6C	NO: industrial type M: truck type P: truck type double seal kits	003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31
T6D		014/B14、017/B17、020/B20、024/B24、028/B28、031/B31、035/B35、038/B38、042/B42、045/B45、050/B50、061
T6E		042、045、050、052、 057、062、066、072、085

003/B03: In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate structure.

< Technical Data

Series	Flow code (Usgpm)	Geometric displace-ment mL/r	Max. pressure Mpa						Max. speed r/min		Min. speed r/min
			Antiwear hydraulic oil		Genneral hydraulic oil or phosphate eater fluid		Water glycol fluid or water-oil emulsions		Genneral hydraulic oil or phosphate eater fluid or antiwear hydraulic oil	Water glycol fluid or phosphate eater fluid or water-oil emulsions
			Instant	Continuous	Instant	Continuous	Instant	Continuous
T7B(S)	B02	5.8	35	32	24	21	17.5	14	3600	1800	600
	B03	9.8
	B04	12.8
	B05	15.9
	B06	19.8
	B07	22.5
	B08	24.9
	B10	31.8
	B12	41.0	30	27.5					3000
	B15	50.0	28	24
T7D(S)	B14	44.0	30	25	24	21	17.5	14	3000	1800	600
	B17	55.0
	B20	66.0
	B22	70.3
	B24	81.1
	B28	90.0
	B31	99.2
	B35	113.4	28						2800
	B38	120.6
	B42	137.5	26	23					2500
T7E(S)	042	132.3	25	21	21	17.5	17.5	14	2200	1800	600
	045	142.4
	050	158.5
	052	164.8
	054	171.0
	57	183.3
	062	196.7
	066	213.3
	072	227.1
	085	268.7	9	7.5	7.5	7.5	7.5	7.5	2000

003/B03： In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate strucrure.
<Operation Performance

Using the anti-wear hydraulic oil, the oil viscosity 24cst.

Series	Geological Displacement mL/rev	Rotation speed r/min	Flow (L/min)							Input Power (KW)
			P=0 Mpa	P=7 Mpa	P=14 Mpa	P=21 Mpa	P=24 Mpa	P=28 Mpa	P=32 Mpa	P=0.7 Mpa	P=7 Mpa	P=14 Mpa	P=21 Mpa	P=24 Mpa	P=28 Mpa	P=32 Mpa
			L/min	L/min	L/min	L/min	L/min	L/min	L/min	KW	KW	KW	KW	KW	KW	KW
T7B(S)-B02	5.8	1000	5.8	4.9	4.2	3.3	-	-	-	0.2	0.9	1.7	2.5	-	-	-
		1200	7.0	6.1	5.4	4.5	4.0	-	-	0.4	1.3	2.2	3.2	3.6	-	-
		1500	8.7	7.8	7.1	6.2	5.7	5.2	4.7	0.6	1.7	2.8	4.0	4.5	5.2	5.9
		1800	10.4	9.5	8.8	7.9	7.4	6.9	6.4	0.7	2.0	3.4	5.0	5.6	6.4	7.2
T7B(S)-B03	9.8	1000	9.8	8.9	8.2	7.3	6.8	6.3	5.8	0.2	1.3	2.6	3.9	4.5	5.2	6.0
		1200	11.8	10.9	10.2	9.3	8.8	8.3	7.8	0.4	1.8	3.3	4.9	5.5	6.4	7.3
		1500	14.7	13.8	13.1	12.2	11.7	11.2	10.7	0.7	2.4	4.2	6.1	6.9	8.0	9.1
		1800	17.6	16.7	16.0	15.1	14.6	14.1	13.6	0.8	2.8	5.1	7.5	8.5	9.7	11.0
T7B(S)-B04	12.8	1000	12.8	11.9	11.2	10.3	9.8	9.3	8.8	0.2	1.7	3.3	5.0	5.7	6.6	7.6
		1200	15.4	14.5	13.8	12.9	12.4	11.9	11.4	0.5	2.2	4.2	6.1	6.9	8.1	9.2
		1500	19.2	18.3	17.6	16.7	16.2	15.7	15.2	0.7	2.9	5.3	7.7	8.7	10.1	11.5
		1800	23.0	22.1	21.4	20.5	20.0	19.5	19.0	0.9	3.4	6.4	9.4	10.6	12.3	13.9
T7B(S)-B05	15.9	1000	15.9	15.0	14.3	13.4	12.9	12.4	11.9	0.3	2.1	4.1	6.0	6.9	8.1	9.2
		1200	19.1	18.2	17.5	16.6	16.1	15.6	15.1	0.5	2.7	5.0	7.4	8.4	9.8	11.2
		1500	23.9	23.0	22.3	21.4	20.9	20.4	19.9	0.8	3.4	6.4	9.3	10.6	12.3	14.0
		1800	28.6	27.7	27.0	26.1	25.6	25.1	24.6	0.9	4.1	7.7	11.3	12.8	14.9	16.9
T7B(S)-B06	19.8	1000	19.8	18.9	18.2	17.3	16.8	16.3	15.8	0.3	2.5	5.0	7.4	8.5	9.9	11.3
		1200	23.8	22.9	22.2	21.3	20.8	20.3	19.8	0.6	3.2	6.1	9.1	10.3	12.0	13.7
		1500	29.7	28.8	28.1	27.2	26.7	26.2	25.7	0.8	4.1	7.7	11.4	12.9	15.0	17.1
		1800	35.6	34.7	34.0	33.1	32.6	32.1	31.6	1.0	4.9	9.3	13.8	15.7	19.1	20.6
T7B(S)-B07	22.5	1000	22.5	21.6	20.9	20.0	19.5	19.0	18.5	0.4	2.8	5.6	8.3	9.6	11.2	12.8
		1200	27.0	26.1	25.4	24.5	24.0	23.5	23.0	0.6	3.6	6.9	10.2	11.6	13.5	15.4
		1500	33.8	32.9	32.2	31.3	30.8	30.3	29.8	0.9	4.6	8.7	12.8	14.6	16.9	19.3
		1800	40.5	39.6	38.9	38.0	37.5	37.0	36.5	1.1	5.5	10.5	15.5	17.6	20.4	23.2
T7B(S)-B08	24.9	1000	24.9	24.0	23.3	22.4	21.9	21.4	20.9	0.4	3.1	6.2	9.2	10.5	12.3	14.0
		1200	29.9	29.0	28.3	27.4	26.9	26.4	25.9	0.6	3.9	7.6	11.2	12.8	14.8	16.9
		1500	37.4	36.5	35.8	34.9	34.4	33.9	33.4	0.9	5.0	9.5	14.1	16.0	18.6	21.2
		1800	44.8	43.9	43.2	42.3	41.8	41.3	40.8	1.1	6.0	11.5	17.0	19.3	22.4	25.5
T7B(S)-B10	31.8	1000	31.8	30.9	30.2	29.3	28.8	28.3	27.8	0.5	3.9	7.8	11.6	13.3	15.5	17.7
		1200	38.2	37.3	36.6	35.7	35.2	34.7	34.2	0.7	4.9	9.5	14.1	16.1	18.7	21.4
		1500	47.7	46.8	46.1	45.2	44.7	44.2	43.7	1.1	6.2	11.9	17.7	20.1	23.4	26.7
		1800	57.2	56.3	55.6	54.7	54.2	53.7	53.2	1.3	7.4	14.4	21.3	24.3	28.2	32.1
T7B(S)-B12	41.0	1000	41.0	40.1	39.4	38.5	38.0	37.5	-	0.6	5.0	9.9	14.8	17.0	19.8	-
		1200	49.2	48.3	47.6	46.7	46.2	45.7	-	0.9	6.2	12.1	18.0	20.5	23.9	-
		1500	61.5	60.6	59.9	59.0	58.5	58.0	-	1.2	7.8	15.2	22.5	25.7	29.9	-
		1800	73.8	72.9	72.2	71.3	70.8	70.3	-	1.5	9.4	18.2	27.1	30.9	35.9	-
T7B(S)-B15	50.0	1000	50.0	49.1	48.4	47.5	47.0	46.5	-	0.7	6.0	12.0	18.0	20.6	24.0	-
		1200	60.0	59.1	58.4	57.5	57.0	56.5	-	1.0	7.4	14.6	21.7	24.8	28.9	-
		1500	75.0	74.1	73.4	72.5	72.0	71.5	-	1.4	9.4	18.3	27.2	31.1	36.2	-
		1800	90.0	89.1	88.4	87.5	87.0	86.5	-	1.7	11.3	22.0	32.8	37.4	43.5	-

Series	Geological Displacement mL/rev	Rotation speed r/min	Flow (L/min)
			P=0 Mpa	P=14 Mpa	P=30 Mpa
			L/min	L/min	L/min
T7D(S)-B14	44.0	1000	44.0	37.4	29.9
		1200	52.8	46.2	38.7
		1500	66.0	59.4	51.9
		1800	79.2	72.6	65.1
T7D(S)-B17	55.0	1000	55.0	48.4	40.9
		1200	66.0	59.4	51.9
		1500	82.5	75.9	68.4
		1800	99.0	92.4	84.9
T7D(S)-B20	66.0	1000	66.0	59.4	51.9
		1200	79.2	72.6	65.1
		1500	99.0	92.4	84.9
		1800	118.8	112.2	104.7
T7D(S)-B22	70.3	1000	70.3	63.7	56.2
		1200	84.4	77.8	70.3
		1500	105.5	98.8	91.4
		1800	126.5	119.9	112.4
T7D(S)-B24	81.1	1000	81.1	74.5	67.0
		1200	97.3	90.7	83.2
		1500	121.7	115.1	107.6
		1800	146.0	139.4	131.9
T7D(S)-B28	90.0	1000	90.0	83.4	75.9
		1200	108.0	101.4	93.9
		1500	135.0	128.4	120.9
		1800	162.0	155.4	147.9
T7D(S)-B31	99.2	1000	99.2	92.6	85.1
		1200	119.8	113.2	105.7
		1500	148.8	142.2	134.7
		1800	178.6	172.0	164.5
T7D(S)-B35	113.4	1000	113.4	106.8	-
		1200	136.1	129.5	-
		1500	170.1	163.5	-
		1800	204.1	197.5	-
T7D(S)-B38	120.6	1000	120.6	114.0	-
		1200	144.7	138.1	-
		1500	180.9	174.3	-
		1800	217.1	210.5	-
T7D(S)-B42	137.5	1000	137.5	130.9	-
		1200	165.0	158.4	-
		1500	206.3	199.7	-
		1800	247.5	240.9	-

Series	Input Power (KW)
	P=0.7 Mpa	P=14 Mpa	P=30 Mpa
	KW	KW	KW
T7D(S)-B14	1.5	16.6	34.2
T7D(S)-B17	1.7	20.4	42.4
T7D(S)-B20	1.9	24.3	50.7
T7D(S)-B22	2.0	25.8	53.9
T7D(S)-B24	2.2	29.5	62.0
T7D(S)-B28	2.3	32.7	68.7
T7D(S)-B31	2.5	35.9	75.6
T7D(S)-B35	2.7	40.8	-
T7D(S)-B38	2.9	43.4	-
T7D(S)-B42	3.2	49.3	-

Series	Geological Displacement mL/rev	Rotation speed r/min	Flow (L/min)
			P=0 Mpa	P=14 Mpa	P=24 Mpa
			L/min	L/min	L/min
T7E(S)-042	132.3	1000	132.3	122.3	115.2
		1200	158.8	150.8	143.7
		1500	198.5	188.5	181.4
		1800	238.1	228.1	221.0
T7E(S)-045	142.4	1000	142.4	132.4	125.3
		1200	170.9	160.9	153.8
		1500	213.6	203.6	196.5
		1800	256.3	246.3	239.2
T7E(S)-050	158.5	1000	158.5	158.5	141.4
		1200	190.2	180.2	173.1
		1500	237.7	227.7	220.6
		1800	285.3	275.3	268.2
T7E(S)-052	164.8	1000	164.8	154.8	147.7
		1200	197.8	187.8	180.7
		1500	247.2	237.2	230.1
		1800	296.6	286.6	279.5
T7E(S)-054	171.0	1000	171.0	161.0	153.9
		1200	205.2	195.2	188.1
		1500	256.5	246.5	239.4
		1800	307.8	297.8	290.7
T7E(S)-057	183.3	1000	183.3	173.3	166.2
		1200	220.0	210.0	202.9
		1500	275.0	265.0	257.9
		1800	330.0	320.0	312.9
T7E(S)-062	196.7	1000	196.7	186.7	179.6
		1200	236.0	226.0	218.9
		1500	295.0	285.0	277.9
		1800	354.1	344.1	337.0
T7E(S)-066	213.3	1000	213.3	203.3	196.2
		1200	256.0	246.0	238.9
		1500	319.9	309.0	302.8
		1800	354.1	344.1	337.0
T7E(S)-072	227.1	1000	227.1	217.1	210.0
		1200	272.5	262.5	255.4
		1500	340.6	330.6	323.5
		1800	408.8	398.8	391.7
T7E(S)-085*	268.7	1000	268.7	-	-
		1200	322.4	-	-
		1500	403.0	-	-
		1800	483.7	-	-

*85: The max rotation speed is 2000r/min, and the max intermittent pressure is 21MPa

Series	Input Power (KW)
	P=0 Mpa	P=14 Mpa	P=24 Mpa
	KW	KW	KW
T7E(S)-042	5.2	49.4	82.6
T7E(S)-045	5.4	52.9	88.7
T7E(S)-050	5.7	58.5	50.7
T7E(S)-052	5.8	60.8	102.1
T7E(S)-054	5.9	63	105.8
T7E(S)-057	6.1	67.3	113.2
T7E(S)-062	6.4	71.9	121.3
T7E(S)-066	6.7	77.7	131.2
T7E(S)-072	6.9	82.6	139.5
T7E(S)-085	9.1	-	-

*85: The max rotation speed is 2000rpm/min, and the max intermittent pressure is 21Mpa

Installation Dimensions

	T7B	T7BS	T7D	T7DS	T7E	T7ES	T6C	T6D	T6E
E	38.1	38.1	38.1	38.1	52.3	52.3	38.1	38.1	52.3
F	82.3	82.3	87.4	87.4	110.0	110.0	82.3	87.4	110.0
G	168.5	168.5	184.9	184.9	225.3	225.3	161.6	184.9	225.3
J1	100.0	101.6	125.0	127.0	125.0	127.0	101.6	127.0	127.0
J2	99.967	101.55	124.937	126.095	124.937	129.095	101.55	126.095	126.095
N	140.0	146.0	180.0	181.0	180.0	181.0	146.1	181.0	181.0
O	174.5	174.5	212.4	212.4	213.0	231.0	174.5	212.4	213.0
φP	14.0	14.3	18.0	17.5	18.0	17.5	14.3	17.5	17.5

Oil port			Flange	Install Dimensions(mm)
Oil port			Flange	A1	B1	∅C1	D1	T1 Thread
T7B、T7BS	P	01:3/4"	F06	22.2	47.6	19	76.2	3/8"-16UNCx19.0
	P	00:1"	F08	26.2	52.4	25.4		3/8"-16UNCx19.0
	S	1-1/2"	F12	35.7	69.9	38.1		1/2"-13UNCx22.4
T7D、T7DS	P	1-1/4"	F10	30.2	58.7	31.8	82.6	7/16"-14UNCx22.3
T7D、T7DS	S	2"	F16	42.9	77.8	50.8	82.6	1/2"-13UNCx23.9
T7E、T7ES	P	1-1/2"	F12	35.7	69.9	38.1	98.6	1/2"-13UNCx23.4
T7E、T7ES	S	3"	F24	61.9	106.4	76.2	98.6	5/8"-11UNCx24.0
T6C	P	1"	F08	26.2	52.4	25.4	76.2	3/8"-15UNCx19.0
T6C	S	1-1/2"	F12	35.7	69.9	38.1	76.2	1/2"-13UNCx22.4
T6D	P	1-1/4"	F10	30.2	58.7	31.8	82.6	7/16"-14UNCx22.3
T6D	S	2"	F16	42.9	77.8	50.8	82.6	1/2"13UNCx23.9
T6E	P	1-1/2"	F12	35.7	69.9	38.1	98.6	1/2"-13UNCx23.4
T6E	S	3"	F24	61.9	106.4	76.2	98.6	5/8"-11UNCx24.0

Model	Shaft code	Max torque (N.m)	L1	L2	DIA	K1xK2	H1	M1
T7B	2	●	70.0	40.0	25.0065/24.9935	8.00×7.00	28.22	-
T7BS	1	●	71.4	38.1	22.225/22.200	6.35×6.30	24.95	M8x16
	3	●	40.7	24.5	SAE J498b class1, Diametral pitch 16/32, 13T			-
	4	●	45.5	24.5	SAE J498b class1, Diametral pitch 16/32, 15T			-
T7D	5	●	87.4	50.0	32.018/32.002	10.000×8.00	35.3	M10xx20
T7DS	1	●	83.6	49.3	31.750/31.700	7.94×7.89	35.27	M10xx20
	2	●	73.2	38.1	31.750/31.700	7.94×7.89	35.27
	3	●	55.2	38.0	SAE J498b class1, Diametral pitch 12/24, 14T			-
	4	●	77.7	48.0	SAE J498b class1, Diametral pitch 12/24, 14T			-
T7E	5	●	90.0	60.0	38.018/38.002	10.00×8.00	41.3	M10xx20
T7ES	1	●	90.9	50.8	38.100/38.050	9.52×9.47	42.36	M10xx20
	2	●	61.9	38.1	31.750/31.700	7.94×7.89	35.27	-
	3	●	55.2	38.0	SAE J498b class1, Diametral pitch 12/24, 14T			-
	4	●	62.2	31.5	SAE J498b class1, Diametral pitch 12/24, 17T			-
T6C	1	275	71.4	38.1	22.225/22.200	6.35×6.30	24.95	M8x16
	2	238	58.2	31.7	22.225/22.200	4.76×4.71	24.53	-
	3	343	40.7	24.5	SAE J498b class1, Diametral pitch 16/32, 14T			-
	4	●	45.5	24.5	SAE J498b class1, Diametral pitch 16/32, 17T			-
T6D	1	●	83.6	49.3	31.750/31.700	7.94×7.89	35.27	M10xx20
	2	577	73.2	38.1	31.750/31.700	7.94×7.89	35.27	-
	3	●	55.2	31.7	SAE J498b class1, Diametral pitch 12/24, 14T			-
	4	●	77.7	24.5	SAE J498b class1, Diametral pitch 12/24, 14T			-
T6E	1	●	90.9	50.8	38.100/38.050			M10xx20
	2	577	61.9	38.1	31.750/31.700			-
	3	●	55.2	38.0	SAE J498b class1, Diametral pitch 12/24, 14T			-
	4	●	62.2	31.5	SAE J498b class1, Diametral pitch 12/24, 17T			-

● work at maxmimum flow and pressure

Product detail pictures:

Related Product Guide:
Why every website owner needs Google Analytics

We will devote ourselves to giving our esteemed buyers using the most enthusiastically thoughtful services for Factory wholesale T7 Series Single pumps to Croatia Manufacturers, The product will supply to all over the world, such as: Myanmar, New Zealand, Plymouth, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, please click the button to acquire additional nformation.

Denison Single Vane Pump

Gsxr 1000 Oil Pump Gear

High Quality Desoldering Pump

Hydraulic Oil Pump Types

Nuert Rotary Vane Pump

Oil Pump Dispenser

The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.

By Gary from San Francisco - 2017.05.21 12:31

The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.

By Rosalind from Benin - 2018.02.21 12:14