Factory For T6 Series Single Pump Wholesale to Jordan
Factory For T6 Series Single Pump Wholesale to Jordan Detail:
High pressure and high performance dowel pin type vane pumps widely used for plastic machinery, casting machinery, metallurgy machinery, pressing machinery, refining machinery, construction machinery, marine-machinery.
Features
1.With dowel pin vane structure, it can work in high pressure, low noise and long lifetime
2.This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.
3.As the vane pump adopts bilabial vane, it has high oil pollution resistance and wide speed scope.
| NO. | Part | Qty | NO. | Part | Qty | NO. | Part | Qty |
| 1 | Shaft | 1 | 5 | Cir Clip For Shaft | 2 | 9 | Cartridge Kit | 1 |
| 2 | Straight Key | 1 | 6 | Ball Bearing | 1 | 10 | Rear Cover | 1 |
| 3 | Front Cover | 1 | 7 | Cir Clip For Hole | 1 | 11 | Hexagon Head Bolt | 4 |
| 4 | Shaft Seal | 1 | 8 | Rectangle Seal Ring | 1 |
<
| T7B | S | -B10 | -1 | R | 00 | -A | 1 | 01 |
| Series | Type Code | Flow code | Shaft type |
Rotation | Port positions | Design number |
Sealing Level |
Port dimensions |
| T7B |
NO: ISO 3019 Installation Flange S: SAE J744 installation flange |
B02、B03、B04、B05、 B06、B07、B08、B10、 B12、B15 |
See of shaft | (Views from shaft end of pump)
R-right hand for clockwise L-left hand for counter-clockwise |
(Views from shaft end of pump) 00-Opposite inlet port 01-Inline with inlet 02-90°CCW from inlet 03-90°CW from inlet |
A | 1-S1, NBR Nitrile rubber 5-S5, Fluororubber |
See
installation dimensions |
| T7D | B14、B17、B20、B22、 B24、B28、B31、B35、 B38、B42 |
NO | ||||||
| T7E | 042、045、050、052、 054、057、062、066、 072、085 |
|||||||
| T6C | NO:
industrial type M: truck type P: truck type double seal kits |
003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31 | ||||||
| T6D | 014/B14、017/B17、020/B20、024/B24、028/B28、031/B31、035/B35、038/B38、042/B42、045/B45、050/B50、061 | |||||||
| T6E | 042、045、050、052、 057、062、066、072、085 |
003/B03: In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate structure.
<
| Series | Flow code (Usgpm) |
Geometric displace-ment mL/r | Max. pressure Mpa | Max. speed r/min | Min. speed r/min | ||||||
| Antiwear hydraulic oil |
Genneral hydraulic oil or phosphate eater fluid | Water glycol fluid or water-oil emulsions |
Genneral hydraulic oil or phosphate eater fluid or antiwear hydraulic oil |
Water glycol fluid or phosphate eater fluid or water-oil emulsions |
|||||||
| Instant | Continuous | Instant | Continuous | Instant | Continuous | ||||||
| T7B(S) | B02 | 5.8 | 35 | 32 | 24 | 21 | 17.5 | 14 | 3600 | 1800 | 600 |
| B03 | 9.8 | ||||||||||
| B04 | 12.8 | ||||||||||
| B05 | 15.9 | ||||||||||
| B06 | 19.8 | ||||||||||
| B07 | 22.5 | ||||||||||
| B08 | 24.9 | ||||||||||
| B10 | 31.8 | ||||||||||
| B12 | 41.0 | 30 | 27.5 | 3000 | |||||||
| B15 | 50.0 | 28 | 24 | ||||||||
| T7D(S) | B14 | 44.0 | 30 | 25 | 24 | 21 | 17.5 | 14 | 3000 | 1800 | 600 |
| B17 | 55.0 | ||||||||||
| B20 | 66.0 | ||||||||||
| B22 | 70.3 | ||||||||||
| B24 | 81.1 | ||||||||||
| B28 | 90.0 | ||||||||||
| B31 | 99.2 | ||||||||||
| B35 | 113.4 | 28 | 2800 | ||||||||
| B38 | 120.6 | ||||||||||
| B42 | 137.5 | 26 | 23 | 2500 | |||||||
| T7E(S) | 042 | 132.3 | 25 | 21 | 21 | 17.5 | 17.5 | 14 | 2200 | 1800 | 600 |
| 045 | 142.4 | ||||||||||
| 050 | 158.5 | ||||||||||
| 052 | 164.8 | ||||||||||
| 054 | 171.0 | ||||||||||
| 57 | 183.3 | ||||||||||
| 062 | 196.7 | ||||||||||
| 066 | 213.3 | ||||||||||
| 072 | 227.1 | ||||||||||
| 085 | 268.7 | 9 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 2000 | |||
003/B03： In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate strucrure.
Technical Date
<
| Series | Flow code (Usgpm) |
Geometric displace-ment mL/r | Max. pressure Mpa | Max. speed r/min | Min. speed r/min | ||||||
| Antiwear hydraulic oil |
Genneral hydraulic oil or phosphate eater fluid | Water glycol fluid or water-oil emulsions |
Genneral hydraulic oil or phosphate eater fluid or antiwear hydraulic oil |
Water glycol fluid or phosphate eater fluid or water-oil emulsions |
|||||||
| Instant | Continuous | Instant | Continuous | Instant | Continuous | ||||||
| T6C | 003 | 10.8 | 28 | 24 | 21 | 17.5 | 17.5 | 14 | 2800 | 1800 | 600 |
| 005 | 17.2 | ||||||||||
| 006 | 21.3 | ||||||||||
| 008 | 26.4 | ||||||||||
| 010 | 34.1 | ||||||||||
| 012 | 37.1 | ||||||||||
| 014 | 46.0 | ||||||||||
| 017 | 58.3 | ||||||||||
| 020 | 63.8 | ||||||||||
| 022 | 70.3 | ||||||||||
| 025 | 79.3 | 2500 | |||||||||
| 028 | 88.8 | 21 | 16 | 16 | |||||||
| 031 | 100.0 | ||||||||||
| T6D | 014 | 47.6 | 25 | 21 | 21 | 17.5 | 17.5 | 14 | 2500 | 1800 | 600 |
| 017 | 58.2 | ||||||||||
| 020 | 66.0 | ||||||||||
| 024 | 79.5 | ||||||||||
| 028 | 89.7 | ||||||||||
| 031 | 98.3 | ||||||||||
| 035 | 111.0 | ||||||||||
| 038 | 120.3 | ||||||||||
| 042 | 136.0 | 2200 | |||||||||
| 045 | 145.7 | ||||||||||
| 050 | 158.0 | 21 | 16 | 16 | |||||||
| 061 | 190.5 | 12 | 8 | 8 | 8 | 7.5 | 7.5 | ||||
| T6E | 042 | 132.3 | 25 | 21 | 21 | 17.5 | 17.5 | 14 | 2200 | 1800 | 600 |
| 045 | 142.4 | ||||||||||
| 050 | 158.5 | ||||||||||
| 052 | 164.8 | ||||||||||
| 057 | 179.8 | ||||||||||
| 062 | 196.7 | ||||||||||
| 066 | 213.3 | ||||||||||
| 072 | 227.1 | ||||||||||
| 085 | 269.0 | 12 | 8 | 12 | 8 | 7.5 | 7.5 | 2000 | |||
003/B03： In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate strucrure.
Operation Performance
<
| Series |
Geological Displacement mL/rev |
Rotation speed r/min |
Flow (L/min) | Input Power (KW) | ||||||||||||
| P=0 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
P=32 Mpa |
P=0.7 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
P=32 Mpa |
|||
| L/min | L/min | L/min | L/min | L/min | L/min | L/min | KW | KW | KW | KW | KW | KW | KW | |||
| T7B(S)-B02 | 5.8 | 1000 | 5.8 | 4.9 | 4.2 | 3.3 | - | - | - | 0.2 | 0.9 | 1.7 | 2.5 | - | - | - |
| 1200 | 7.0 | 6.1 | 5.4 | 4.5 | 4.0 | - | - | 0.4 | 1.3 | 2.2 | 3.2 | 3.6 | - | - | ||
| 1500 | 8.7 | 7.8 | 7.1 | 6.2 | 5.7 | 5.2 | 4.7 | 0.6 | 1.7 | 2.8 | 4.0 | 4.5 | 5.2 | 5.9 | ||
| 1800 | 10.4 | 9.5 | 8.8 | 7.9 | 7.4 | 6.9 | 6.4 | 0.7 | 2.0 | 3.4 | 5.0 | 5.6 | 6.4 | 7.2 | ||
| T7B(S)-B03 | 9.8 | 1000 | 9.8 | 8.9 | 8.2 | 7.3 | 6.8 | 6.3 | 5.8 | 0.2 | 1.3 | 2.6 | 3.9 | 4.5 | 5.2 | 6.0 |
| 1200 | 11.8 | 10.9 | 10.2 | 9.3 | 8.8 | 8.3 | 7.8 | 0.4 | 1.8 | 3.3 | 4.9 | 5.5 | 6.4 | 7.3 | ||
| 1500 | 14.7 | 13.8 | 13.1 | 12.2 | 11.7 | 11.2 | 10.7 | 0.7 | 2.4 | 4.2 | 6.1 | 6.9 | 8.0 | 9.1 | ||
| 1800 | 17.6 | 16.7 | 16.0 | 15.1 | 14.6 | 14.1 | 13.6 | 0.8 | 2.8 | 5.1 | 7.5 | 8.5 | 9.7 | 11.0 | ||
| T7B(S)-B04 | 12.8 | 1000 | 12.8 | 11.9 | 11.2 | 10.3 | 9.8 | 9.3 | 8.8 | 0.2 | 1.7 | 3.3 | 5.0 | 5.7 | 6.6 | 7.6 |
| 1200 | 15.4 | 14.5 | 13.8 | 12.9 | 12.4 | 11.9 | 11.4 | 0.5 | 2.2 | 4.2 | 6.1 | 6.9 | 8.1 | 9.2 | ||
| 1500 | 19.2 | 18.3 | 17.6 | 16.7 | 16.2 | 15.7 | 15.2 | 0.7 | 2.9 | 5.3 | 7.7 | 8.7 | 10.1 | 11.5 | ||
| 1800 | 23.0 | 22.1 | 21.4 | 20.5 | 20.0 | 19.5 | 19.0 | 0.9 | 3.4 | 6.4 | 9.4 | 10.6 | 12.3 | 13.9 | ||
| T7B(S)-B05 | 15.9 | 1000 | 15.9 | 15.0 | 14.3 | 13.4 | 12.9 | 12.4 | 11.9 | 0.3 | 2.1 | 4.1 | 6.0 | 6.9 | 8.1 | 9.2 |
| 1200 | 19.1 | 18.2 | 17.5 | 16.6 | 16.1 | 15.6 | 15.1 | 0.5 | 2.7 | 5.0 | 7.4 | 8.4 | 9.8 | 11.2 | ||
| 1500 | 23.9 | 23.0 | 22.3 | 21.4 | 20.9 | 20.4 | 19.9 | 0.8 | 3.4 | 6.4 | 9.3 | 10.6 | 12.3 | 14.0 | ||
| 1800 | 28.6 | 27.7 | 27.0 | 26.1 | 25.6 | 25.1 | 24.6 | 0.9 | 4.1 | 7.7 | 11.3 | 12.8 | 14.9 | 16.9 | ||
| T7B(S)-B06 | 19.8 | 1000 | 19.8 | 18.9 | 18.2 | 17.3 | 16.8 | 16.3 | 15.8 | 0.3 | 2.5 | 5.0 | 7.4 | 8.5 | 9.9 | 11.3 |
| 1200 | 23.8 | 22.9 | 22.2 | 21.3 | 20.8 | 20.3 | 19.8 | 0.6 | 3.2 | 6.1 | 9.1 | 10.3 | 12.0 | 13.7 | ||
| 1500 | 29.7 | 28.8 | 28.1 | 27.2 | 26.7 | 26.2 | 25.7 | 0.8 | 4.1 | 7.7 | 11.4 | 12.9 | 15.0 | 17.1 | ||
| 1800 | 35.6 | 34.7 | 34.0 | 33.1 | 32.6 | 32.1 | 31.6 | 1.0 | 4.9 | 9.3 | 13.8 | 15.7 | 19.1 | 20.6 | ||
| T7B(S)-B07 | 22.5 | 1000 | 22.5 | 21.6 | 20.9 | 20.0 | 19.5 | 19.0 | 18.5 | 0.4 | 2.8 | 5.6 | 8.3 | 9.6 | 11.2 | 12.8 |
| 1200 | 27.0 | 26.1 | 25.4 | 24.5 | 24.0 | 23.5 | 23.0 | 0.6 | 3.6 | 6.9 | 10.2 | 11.6 | 13.5 | 15.4 | ||
| 1500 | 33.8 | 32.9 | 32.2 | 31.3 | 30.8 | 30.3 | 29.8 | 0.9 | 4.6 | 8.7 | 12.8 | 14.6 | 16.9 | 19.3 | ||
| 1800 | 40.5 | 39.6 | 38.9 | 38.0 | 37.5 | 37.0 | 36.5 | 1.1 | 5.5 | 10.5 | 15.5 | 17.6 | 20.4 | 23.2 | ||
| T7B(S)-B08 | 24.9 | 1000 | 24.9 | 24.0 | 23.3 | 22.4 | 21.9 | 21.4 | 20.9 | 0.4 | 3.1 | 6.2 | 9.2 | 10.5 | 12.3 | 14.0 |
| 1200 | 29.9 | 29.0 | 28.3 | 27.4 | 26.9 | 26.4 | 25.9 | 0.6 | 3.9 | 7.6 | 11.2 | 12.8 | 14.8 | 16.9 | ||
| 1500 | 37.4 | 36.5 | 35.8 | 34.9 | 34.4 | 33.9 | 33.4 | 0.9 | 5.0 | 9.5 | 14.1 | 16.0 | 18.6 | 21.2 | ||
| 1800 | 44.8 | 43.9 | 43.2 | 42.3 | 41.8 | 41.3 | 40.8 | 1.1 | 6.0 | 11.5 | 17.0 | 19.3 | 22.4 | 25.5 | ||
| T7B(S)-B10 | 31.8 | 1000 | 31.8 | 30.9 | 30.2 | 29.3 | 28.8 | 28.3 | 27.8 | 0.5 | 3.9 | 7.8 | 11.6 | 13.3 | 15.5 | 17.7 |
| 1200 | 38.2 | 37.3 | 36.6 | 35.7 | 35.2 | 34.7 | 34.2 | 0.7 | 4.9 | 9.5 | 14.1 | 16.1 | 18.7 | 21.4 | ||
| 1500 | 47.7 | 46.8 | 46.1 | 45.2 | 44.7 | 44.2 | 43.7 | 1.1 | 6.2 | 11.9 | 17.7 | 20.1 | 23.4 | 26.7 | ||
| 1800 | 57.2 | 56.3 | 55.6 | 54.7 | 54.2 | 53.7 | 53.2 | 1.3 | 7.4 | 14.4 | 21.3 | 24.3 | 28.2 | 32.1 | ||
| T7B(S)-B12 | 41.0 | 1000 | 41.0 | 40.1 | 39.4 | 38.5 | 38.0 | 37.5 | - | 0.6 | 5.0 | 9.9 | 14.8 | 17.0 | 19.8 | - |
| 1200 | 49.2 | 48.3 | 47.6 | 46.7 | 46.2 | 45.7 | - | 0.9 | 6.2 | 12.1 | 18.0 | 20.5 | 23.9 | - | ||
| 1500 | 61.5 | 60.6 | 59.9 | 59.0 | 58.5 | 58.0 | - | 1.2 | 7.8 | 15.2 | 22.5 | 25.7 | 29.9 | - | ||
| 1800 | 73.8 | 72.9 | 72.2 | 71.3 | 70.8 | 70.3 | - | 1.5 | 9.4 | 18.2 | 27.1 | 30.9 | 35.9 | - | ||
| T7B(S)-B15 | 50.0 | 1000 | 50.0 | 49.1 | 48.4 | 47.5 | 47.0 | 46.5 | - | 0.7 | 6.0 | 12.0 | 18.0 | 20.6 | 24.0 | - |
| 1200 | 60.0 | 59.1 | 58.4 | 57.5 | 57.0 | 56.5 | - | 1.0 | 7.4 | 14.6 | 21.7 | 24.8 | 28.9 | - | ||
| 1500 | 75.0 | 74.1 | 73.4 | 72.5 | 72.0 | 71.5 | - | 1.4 | 9.4 | 18.3 | 27.2 | 31.1 | 36.2 | - | ||
| 1800 | 90.0 | 89.1 | 88.4 | 87.5 | 87.0 | 86.5 | - | 1.7 | 11.3 | 22.0 | 32.8 | 37.4 | 43.5 | - | ||
<
| Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | ||
| P=0 Mpa |
P=14 Mpa |
P=30 Mpa |
|||
| L/min | L/min | L/min | |||
| T7D(S)-B14 | 44.0 | 1000 | 44.0 | 37.4 | 29.9 |
| 1200 | 52.8 | 46.2 | 38.7 | ||
| 1500 | 66.0 | 59.4 | 51.9 | ||
| 1800 | 79.2 | 72.6 | 65.1 | ||
| T7D(S)-B17 | 55.0 | 1000 | 55.0 | 48.4 | 40.9 |
| 1200 | 66.0 | 59.4 | 51.9 | ||
| 1500 | 82.5 | 75.9 | 68.4 | ||
| 1800 | 99.0 | 92.4 | 84.9 | ||
| T7D(S)-B20 | 66.0 | 1000 | 66.0 | 59.4 | 51.9 |
| 1200 | 79.2 | 72.6 | 65.1 | ||
| 1500 | 99.0 | 92.4 | 84.9 | ||
| 1800 | 118.8 | 112.2 | 104.7 | ||
| T7D(S)-B22 | 70.3 | 1000 | 70.3 | 63.7 | 56.2 |
| 1200 | 84.4 | 77.8 | 70.3 | ||
| 1500 | 105.5 | 98.8 | 91.4 | ||
| 1800 | 126.5 | 119.9 | 112.4 | ||
| T7D(S)-B24 | 81.1 | 1000 | 81.1 | 74.5 | 67.0 |
| 1200 | 97.3 | 90.7 | 83.2 | ||
| 1500 | 121.7 | 115.1 | 107.6 | ||
| 1800 | 146.0 | 139.4 | 131.9 | ||
| T7D(S)-B28 | 90.0 | 1000 | 90.0 | 83.4 | 75.9 |
| 1200 | 108.0 | 101.4 | 93.9 | ||
| 1500 | 135.0 | 128.4 | 120.9 | ||
| 1800 | 162.0 | 155.4 | 147.9 | ||
| T7D(S)-B31 | 99.2 | 1000 | 99.2 | 92.6 | 85.1 |
| 1200 | 119.8 | 113.2 | 105.7 | ||
| 1500 | 148.8 | 142.2 | 134.7 | ||
| 1800 | 178.6 | 172.0 | 164.5 | ||
| T7D(S)-B35 | 113.4 | 1000 | 113.4 | 106.8 | - |
| 1200 | 136.1 | 129.5 | - | ||
| 1500 | 170.1 | 163.5 | - | ||
| 1800 | 204.1 | 197.5 | - | ||
| T7D(S)-B38 | 120.6 | 1000 | 120.6 | 114.0 | - |
| 1200 | 144.7 | 138.1 | - | ||
| 1500 | 180.9 | 174.3 | - | ||
| 1800 | 217.1 | 210.5 | - | ||
| T7D(S)-B42 | 137.5 | 1000 | 137.5 | 130.9 | - |
| 1200 | 165.0 | 158.4 | - | ||
| 1500 | 206.3 | 199.7 | - | ||
| 1800 | 247.5 | 240.9 | - | ||
<
| Series | Input Power (KW) | ||
| P=0.7 Mpa |
P=14 Mpa |
P=30 Mpa |
|
| KW | KW | KW | |
| T7D(S)-B14 | 1.5 | 16.6 | 34.2 |
| T7D(S)-B17 | 1.7 | 20.4 | 42.4 |
| T7D(S)-B20 | 1.9 | 24.3 | 50.7 |
| T7D(S)-B22 | 2.0 | 25.8 | 53.9 |
| T7D(S)-B24 | 2.2 | 29.5 | 62.0 |
| T7D(S)-B28 | 2.3 | 32.7 | 68.7 |
| T7D(S)-B31 | 2.5 | 35.9 | 75.6 |
| T7D(S)-B35 | 2.7 | 40.8 | - |
| T7D(S)-B38 | 2.9 | 43.4 | - |
| T7D(S)-B42 | 3.2 | 49.3 | - |
<
| Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | ||
| P=0 Mpa |
P=14 Mpa |
P=24 Mpa |
|||
| L/min | L/min | L/min | |||
| T7E(S)-042 | 132.3 | 1000 | 132.3 | 122.3 | 115.2 |
| 1200 | 158.8 | 150.8 | 143.7 | ||
| 1500 | 198.5 | 188.5 | 181.4 | ||
| 1800 | 238.1 | 228.1 | 221.0 | ||
| T7E(S)-045 | 142.4 | 1000 | 142.4 | 132.4 | 125.3 |
| 1200 | 170.9 | 160.9 | 153.8 | ||
| 1500 | 213.6 | 203.6 | 196.5 | ||
| 1800 | 256.3 | 246.3 | 239.2 | ||
| T7E(S)-050 | 158.5 | 1000 | 158.5 | 158.5 | 141.4 |
| 1200 | 190.2 | 180.2 | 173.1 | ||
| 1500 | 237.7 | 227.7 | 220.6 | ||
| 1800 | 285.3 | 275.3 | 268.2 | ||
| T7E(S)-052 | 164.8 | 1000 | 164.8 | 154.8 | 147.7 |
| 1200 | 197.8 | 187.8 | 180.7 | ||
| 1500 | 247.2 | 237.2 | 230.1 | ||
| 1800 | 296.6 | 286.6 | 279.5 | ||
| T7E(S)-054 | 171.0 | 1000 | 171.0 | 161.0 | 153.9 |
| 1200 | 205.2 | 195.2 | 188.1 | ||
| 1500 | 256.5 | 246.5 | 239.4 | ||
| 1800 | 307.8 | 297.8 | 290.7 | ||
| T7E(S)-057 | 183.3 | 1000 | 183.3 | 173.3 | 166.2 |
| 1200 | 220.0 | 210.0 | 202.9 | ||
| 1500 | 275.0 | 265.0 | 257.9 | ||
| 1800 | 330.0 | 320.0 | 312.9 | ||
| T7E(S)-062 | 196.7 | 1000 | 196.7 | 186.7 | 179.6 |
| 1200 | 236.0 | 226.0 | 218.9 | ||
| 1500 | 295.0 | 285.0 | 277.9 | ||
| 1800 | 354.1 | 344.1 | 337.0 | ||
| T7E(S)-066 | 213.3 | 1000 | 213.3 | 203.3 | 196.2 |
| 1200 | 256.0 | 246.0 | 238.9 | ||
| 1500 | 319.9 | 309.0 | 302.8 | ||
| 1800 | 354.1 | 344.1 | 337.0 | ||
| T7E(S)-072 | 227.1 | 1000 | 227.1 | 217.1 | 210.0 |
| 1200 | 272.5 | 262.5 | 255.4 | ||
| 1500 | 340.6 | 330.6 | 323.5 | ||
| 1800 | 408.8 | 398.8 | 391.7 | ||
| T7E(S)-085* | 268.7 | 1000 | 268.7 | - | - |
| 1200 | 322.4 | - | - | ||
| 1500 | 403.0 | - | - | ||
| 1800 | 483.7 | - | - | ||
*85: The max rotation speed is 2000r/min, and the max intermittent pressure is 21MPa
<
| Series | Input Power (KW) | ||
| P=0 Mpa |
P=14 Mpa |
P=24 Mpa |
|
| KW | KW | KW | |
| T7E(S)-042 | 5.2 | 49.4 | 82.6 |
| T7E(S)-045 | 5.4 | 52.9 | 88.7 |
| T7E(S)-050 | 5.7 | 58.5 | 50.7 |
| T7E(S)-052 | 5.8 | 60.8 | 102.1 |
| T7E(S)-054 | 5.9 | 63 | 105.8 |
| T7E(S)-057 | 6.1 | 67.3 | 113.2 |
| T7E(S)-062 | 6.4 | 71.9 | 121.3 |
| T7E(S)-066 | 6.7 | 77.7 | 131.2 |
| T7E(S)-072 | 6.9 | 82.6 | 139.5 |
| T7E(S)-085 | 9.1 | - | - |
| Series |
Geological Displacement mL/rev |
Rotation speed r/min |
Flow (L/min) | Input Power (KW) | ||||||||||
| P=0 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
P=0.7 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=28 Mpa |
|||
| L/min | L/min | L/min | L/min | L/min | L/min | KW | KW | KW | KW | KW | KW | |||
| T6C-003 T6C-B03 |
10.8 | 1000 | 10.8 | 8.3 | 5.8 | - | - | - | 0.9 | 2.2 | 3.7 | - | - | - |
| 1200 | 13.0 | 10.5 | 8.0 | - | - | - | 1.1 | 2.6 | 4.4 | - | - | - | ||
| 1500 | 16.2 | 13.7 | 11.2 | 8.7 | 8.2 | - | 1.3 | 3.3 | 5.4 | 7.6 | 8.5 | - | ||
| 1800 | 19.4 | 16.9 | 14.4 | 11.9 | 11.4 | 10.3 | 1.7 | 4.0 | 6.4 | 8.9 | 10.0 | 11.5 | ||
| T6C-005 T6C-B05 |
17.2 | 1000 | 17.2 | 14.7 | 12.2 | 9.7 | 9.2 | - | 1.0 | 3.0 | 5.2 | 7.4 | 8.4 | - |
| 1200 | 20.6 | 18.1 | 15.6 | 13.1 | 12.6 | 11.5 | 1.1 | 3.5 | 6.2 | 8.8 | 10.0 | 11.5 | ||
| 1500 | 25.8 | 23.3 | 20.8 | 18.3 | 17.8 | 16.7 | 1.4 | 4.4 | 7.7 | 10.9 | 12.3 | 14.1 | ||
| 1800 | 31.0 | 28.5 | 26.0 | 23.5 | 23.0 | 21.9 | 1.9 | 5.3 | 9.1 | 13.0 | 14.6 | 16.8 | ||
| T6C-006 T6C-B06 |
21.3 | 1000 | 21.3 | 18.8 | 16.3 | 13.8 | 13.3 | 12.2 | 1.0 | 3.4 | 6.1 | 8.9 | 10.0 | 11.5 |
| 1200 | 25.6 | 23.1 | 20.6 | 18.1 | 17.6 | 16.5 | 1.2 | 4.1 | 7.3 | 10.5 | 11.9 | 13.8 | ||
| 1500 | 32.0 | 29.5 | 27.0 | 24.5 | 24.0 | 22.9 | 1.5 | 5.1 | 9.1 | 13.1 | 14.8 | 17.0 | ||
| 1800 | 38.3 | 35.8 | 33.3 | 30.8 | 30.3 | 29.2 | 1.9 | 6.2 | 10.8 | 15.6 | 17.6 | 20.3 | ||
| T6C-008 T6C-B08 |
26.4 | 1000 | 26.4 | 23.9 | 21.4 | 18.9 | 18.4 | 17.3 | 1.1 | 4.0 | 7.3 | 10.6 | 12.0 | 13.9 |
| 1200 | 31.7 | 29.2 | 26.7 | 24.2 | 23.7 | 22.6 | 1.3 | 4.8 | 8.7 | 12.7 | 14.4 | 16.6 | ||
| 1500 | 39.6 | 37.1 | 34.6 | 32.1 | 31.6 | 30.5 | 1.6 | 6.0 | 10.9 | 15.8 | 17.8 | 20.6 | ||
| 1800 | 47.5 | 45.0 | 42.5 | 40.0 | 39.5 | 38.4 | 2.1 | 7.2 | 13.0 | 18.8 | 21.3 | 24.6 | ||
| T6C-010 T6C-B10 |
34.1 | 1000 | 34.1 | 31.6 | 29.1 | 26.6 | 26.1 | 25.0 | 1.2 | 4.9 | 9.1 | 13.3 | 15.1 | 17.5 |
| 1200 | 40.9 | 38.4 | 35.9 | 33.4 | 32.9 | 31.8 | 1.4 | 5.9 | 10.9 | 15.9 | 18.1 | 20.9 | ||
| 1500 | 51.2 | 48.7 | 46.2 | 43.7 | 43.2 | 42.1 | 1.7 | 7.3 | 13.6 | 19.8 | 22.5 | 26.0 | ||
| 1800 | 61.4 | 58.9 | 56.4 | 53.9 | 53.4 | 52.3 | 2.2 | 8.9 | 16.2 | 23.6 | 26.8 | 31.0 | ||
| T6C-012 T6C-B12 |
37.1 | 1000 | 37.1 | 34.6 | 32.1 | 29.6 | 29.1 | 28.0 | 1.2 | 5.3 | 9.8 | 14.4 | 16.3 | 18.9 |
| 1200 | 44.5 | 42.0 | 39.5 | 37.0 | 36.5 | 35.4 | 1.4 | 6.3 | 11.7 | 17.2 | 19.5 | 22.6 | ||
| 1500 | 55.7 | 53.2 | 50.7 | 48.2 | 47.7 | 46.6 | 1.7 | 7.9 | 14.6 | 21.4 | 24.3 | 28.1 | ||
| 1800 | 66.8 | 64.3 | 61.8 | 59.3 | 58.8 | 57.7 | 2.3 | 9.5 | 17.5 | 25.5 | 29.0 | 33.6 | ||
| T6C-014 T6C-B14 |
46.0 | 1000 | 46.0 | 43.5 | 41.0 | 38.5 | 38.0 | 36.9 | 1.3 | 6.3 | 11.9 | 17.5 | 19.9 | 23.1 |
| 1200 | 55.2 | 52.7 | 50.2 | 47.7 | 47.2 | 46.1 | 1.5 | 7.6 | 14.2 | 20.9 | 23.8 | 27.6 | ||
| 1500 | 69.0 | 66.5 | 64.0 | 61.5 | 61.0 | 59.9 | 1.9 | 9.4 | 17.7 | 26.1 | 29.6 | 34.3 | ||
| 1800 | 82.8 | 80.3 | 77.8 | 75.3 | 74.8 | 73.7 | 2.5 | 11.4 | 21.2 | 31.1 | 35.4 | 41.0 | ||
| T6C-017 T6C-B17 |
58.3 | 1000 | 58.3 | 55.8 | 53.3 | 50.8 | 50.3 | 49.2 | 1.5 | 7.8 | 14.8 | 21.8 | 24.8 | 28.8 |
| 1200 | 70.0 | 67.5 | 65.0 | 62.5 | 62.0 | 60.9 | 1.7 | 9.3 | 17.7 | 26.1 | 29.7 | 34.5 | ||
| 1500 | 87.5 | 85.0 | 82.5 | 80.0 | 79.5 | 78.4 | 2.1 | 11.6 | 22.0 | 32.5 | 37.0 | 42.9 | ||
| 1800 | 104.9 | 102.4 | 99.9 | 97.4 | 96.9 | 95.8 | 2.7 | 13.9 | 26.4 | 38.9 | 44.2 | 51.4 | ||
| T6C-020 T6C-B20 |
63.8 | 1000 | 63.8 | 61.3 | 58.8 | 56.3 | 55.8 | 54.7 | 1.5 | 8.4 | 16.0 | 23.7 | 27.0 | 31.4 |
| 1200 | 76.6 | 74.1 | 71.6 | 69.1 | 68.6 | 67.5 | 1.8 | 10.0 | 19.2 | 28.4 | 32.3 | 37.6 | ||
| 1500 | 95.7 | 93.2 | 90.7 | 88.2 | 87.7 | 86.6 | 2.2 | 12.5 | 24.0 | 35.4 | 40.3 | 46.8 | ||
| 1800 | 114.8 | 112.3 | 109.8 | 107.3 | 106.8 | 105.7 | 2.8 | 15.1 | 28.7 | 42.3 | 48.2 | 56.0 | ||
| T6C-022 T6C-B22 |
70.3 | 1000 | 70.3 | 67.8 | 65.3 | 62.8 | 62.3 | 61.2 | 1.6 | 9.2 | 17.6 | 26.0 | 29.6 | 34.4 |
| 1200 | 84.4 | 81.9 | 79.4 | 76.9 | 76.4 | 75.3 | 1.9 | 11.0 | 21.0 | 31.1 | 35.5 | 41.2 | ||
| 1500 | 105.5 | 103.0 | 100.5 | 98.0 | 97.5 | 96.4 | 2.3 | 13.7 | 26.2 | 38.8 | 44.2 | 51.3 | ||
| 1800 | 126.5 | 124.0 | 121.5 | 119.0 | 118.5 | 117.4 | 3.0 | 16.5 | 31.4 | 46.4 | 52.9 | 61.5 | ||
| T6C-025 T6C-B25 |
79.3 | 1000 | 79.3 | 76.8 | 74.3 | 71.8 | 71.3 | 70.2 | 1.7 | 10.2 | 19.7 | 29.2 | 33.2 | 38.6 |
| 1200 | 95.2 | 92.7 | 90.2 | 87.7 | 87.2 | 86.1 | 2.0 | 12.2 | 23.6 | 34.9 | 39.8 | 46.3 | ||
| 1500 | 119.0 | 116.5 | 114.0 | 111.5 | 111.0 | 109.9 | 2.5 | 15.2 | 29.4 | 43.5 | 49.6 | 57.6 | ||
| 1800 | 142.7 | 140.2 | 137.7 | 135.2 | 134.7 | 133.6 | 3.2 | 18.4 | 35.2 | 52.1 | 59.3 | 69.0 | ||
| T6C-028* T6C-B28 |
88.8 | 1000 | 88.8 | 86.3 | 83.8 | 81.3 | - | - | 1.8 | 11.3 | 21.9 | 32.5 | - | - |
| 1200 | 106.6 | 104.1 | 101.6 | 99.1 | - | - | 2.1 | 13.5 | 26.2 | 38.9 | - | - | ||
| 1500 | 133.2 | 130.7 | 128.2 | 125.7 | - | - | 2.7 | 16.9 | 32.7 | 48.5 | - | - | ||
| 1800 | 159.8 | 157.3 | 154.8 | 152.3 | - | - | 3.4 | 20.3 | 39.2 | 58.1 | - | - | ||
| T6C-031* T6C-B31 |
100.0 | 1000 | 100.0 | 97.5 | 95.0 | 92.5 | - | - | 2.0 | 12.6 | 24.5 | 36.4 | - | - |
| 1200 | 120.0 | 117.5 | 115.0 | 112.5 | - | - | 2.3 | 15.1 | 29.4 | 43.6 | - | - | ||
| 1500 | 150.0 | 147.5 | 145.0 | 142.5 | - | - | 2.9 | 18.9 | 39.6 | 54.4 | - | - | ||
| 1800 | 180.0 | 177.5 | 175.0 | 172.5 | - | - | 3.6 | 22.7 | 43.9 | 65.1 | - | - | ||
*28、31: The max intermittent pressure is 21Mpa
—– As the inner leakage is over 50% of theoretical value, so it is not used
<
| Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | Input Power (KW) | ||||||||
| P=0 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=0.7 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
|||
| L/min | L/min | L/min | L/min | L/min | KW | KW | KW | KW | KW | |||
| T6D-014 T6D-B14 |
47.6 | 1000 | 47.6 | 43.6 | 38.6 | 34.6 | 32.6 | 1.6 | 6.8 | 12.6 | 18.3 | 20.7 |
| 1200 | 57.1 | 53.1 | 48.1 | 44.1 | 42.1 | 1.8 | 8.0 | 14.9 | 21.8 | 24.8 | ||
| 1500 | 71.4 | 67.4 | 62.4 | 58.4 | 56.4 | 2.3 | 10.0 | 18.5 | 27.0 | 30.7 | ||
| 1800 | 85.7 | 81.7 | 76.7 | 72.7 | 70.7 | 2.9 | 12.1 | 22.3 | 32.5 | 36.9 | ||
| T6D-017 T6D-B17 | 58.2 | 1000 | 58.2 | 54.2 | 49.2 | 45.2 | 43.2 | 1.7 | 8.0 | 15.0 | 22.0 | 25.0 |
| 1200 | 69.8 | 65.8 | 60.8 | 56.8 | 54.8 | 1.9 | 9.5 | 17.9 | 26.3 | 29.9 | ||
| 1500 | 87.3 | 83.3 | 78.3 | 74.3 | 72.3 | 2.5 | 11.8 | 22.2 | 32.6 | 37.0 | ||
| 1800 | 104.8 | 100.8 | 95.8 | 91.8 | 89.8 | 3.1 | 14.4 | 26.8 | 24.7 | 28.1 | ||
| T6D-020 T6D-B20 | 66.0 | 1000 | 66.0 | 62.0 | 57.0 | 53.0 | 51.0 | 1.8 | 8.9 | 16.8 | 24.7 | 28.1 |
| 1200 | 79.2 | 75.2 | 70.2 | 66.2 | 64.2 | 2.1 | 10.6 | 20.1 | 29.6 | 33.6 | ||
| 1500 | 99.0 | 95.0 | 90.0 | 86.0 | 84.0 | 2.7 | 13.2 | 24.9 | 36.7 | 41.7 | ||
| 1800 | 118.8 | 114.8 | 109.8 | 105.8 | 103.8 | 3.3 | 16.0 | 30.1 | 44.1 | 50.1 | ||
| T6D-024 T6D-B24 | 79.5 | 1000 | 79.5 | 75.5 | 70.5 | 66.5 | 64.5 | 1.9 | 10.5 | 20.0 | 29.4 | 33.5 |
| 1200 | 95.4 | 91.4 | 86.4 | 82.4 | 80.4 | 2.2 | 12.5 | 23.9 | 35.2 | 40.1 | ||
| 1500 | 119.3 | 115.3 | 110.3 | 106.3 | 104.3 | 2.9 | 15.6 | 29.7 | 43.7 | 49.8 | ||
| 1800 | 143.1 | 139.1 | 134.1 | 130.1 | 128.1 | 3.6 | 18.8 | 35.7 | 52.6 | 59.9 | ||
| T6D-028 T6D-B28 | 89.7 | 1000 | 89.7 | 85.7 | 80.7 | 76.7 | 74.7 | 2.0 | 11.7 | 22.3 | 33.0 | 37.5 |
| 1200 | 107.6 | 103.6 | 98.6 | 94.6 | 92.6 | 2.4 | 13.9 | 26.7 | 39.5 | 45.0 | ||
| 1500 | 134.6 | 130.6 | 125.6 | 121.6 | 119.6 | 3.1 | 17.4 | 33.2 | 49.1 | 55.9 | ||
| 1800 | 161.5 | 157.5 | 152.5 | 148.5 | 146.5 | 3.8 | 21.0 | 40.0 | 59.0 | 67.2 | ||
| T6D-031 T6D-B31 | 98.3 | 1000 | 98.3 | 94.3 | 89.3 | 85.3 | 83.3 | 2.1 | 12.7 | 24.3 | 36.0 | 41.0 |
| 1200 | 118.0 | 114.0 | 109.0 | 105.0 | 103.0 | 2.5 | 15.1 | 29.1 | 43.1 | 49.1 | ||
| 1500 | 147.5 | 143.5 | 138.5 | 134.5 | 132.5 | 3.2 | 18.9 | 36.2 | 53.6 | 61.1 | ||
| 1800 | 176.9 | 172.9 | 167.9 | 163.9 | 161.9 | 4.0 | 22.8 | 43.6 | 64.5 | 73.4 | ||
| T6D-035 T6D-B35 | 111.0 | 1000 | 111.0 | 107.0 | 102.0 | 98.0 | 96.0 | 2.3 | 14.2 | 27.3 | 40.5 | 46.1 |
| 1200 | 133.2 | 129.2 | 124.2 | 120.2 | 118.2 | 2.7 | 16.9 | 32.7 | 48.5 | 55.2 | ||
| 1500 | 166.5 | 162.5 | 157.5 | 153.5 | 151.5 | 3.4 | 21.1 | 40.7 | 60.3 | 68.7 | ||
| 1800 | 199.8 | 195.8 | 190.8 | 186.8 | 184.8 | 4.2 | 25.4 | 49.0 | 72.5 | 82.5 | ||
| T6D-038 T6D-B38 | 120.3 | 1000 | 120.3 | 116.3 | 111.3 | 107.3 | 105.3 | 2.4 | 15.2 | 29.5 | 43.7 | 49.8 |
| 1200 | 144.4 | 140.4 | 135.4 | 131.4 | 129.4 | 2.8 | 18.2 | 35.3 | 52.4 | 59.7 | ||
| 1500 | 180.5 | 176.5 | 171.5 | 167.5 | 165.5 | 3.6 | 22.7 | 43.9 | 65.2 | 74.3 | ||
| 1800 | 216.5 | 212.5 | 207.5 | 203.5 | 201.5 | 4.4 | 27.4 | 52.9 | 78.3 | 89.2 | ||
| T6D-042 T6D-B42 | 136.0 | 1000 | 136.0 | 132.0 | 127.0 | 123.0 | 121.0 | 2.6 | 17.1 | 33.1 | 49.2 | 56.1 |
| 1200 | 163.2 | 159.2 | 154.2 | 150.2 | 148.2 | 3.0 | 20.4 | 39.7 | 59.0 | 67.2 | ||
| 1500 | 204.0 | 200.0 | 195.0 | 191.0 | 189.0 | 3.9 | 25.5 | 49.4 | 73.4 | 83.7 | ||
| 1800 | 244.8 | 240.8 | 235.8 | 231.8 | 229.8 | 4.8 | 30.7 | 59.5 | 88.2 | 100.5 | ||
| T6D-045 T6D-B45 | 145.7 | 1000 | 145.7 | 141.7 | 136.7 | 132.7 | 130.7 | 2.7 | 18.2 | 35.4 | 52.6 | 59.9 |
| 1200 | 174.8 | 170.8 | 165.8 | 161.8 | 159.8 | 3.2 | 21.7 | 42.4 | 63.0 | 71.9 | ||
| 1500 | 218.6 | 214.6 | 209.6 | 205.6 | 203.6 | 4.0 | 27.2 | 52.8 | 78.5 | 89.5 | ||
| 1800 | 262.3 | 258.3 | 253.3 | 249.3 | 247.3 | 5.0 | 32.7 | 63.5 | 94.3 | 107.5 | ||
| T6D-050* T6D-B50 | 158.0 | 1000 | 158.0 | 154.0 | 149.0 | 145.0 | - | 2.8 | 19.6 | 38.3 | 56.9 | - |
| 1200 | 189.6 | 185.6 | 180.6 | 176.6 | - | 3.3 | 23.5 | 45.8 | 68.2 | - | ||
| 1500 | 237.0 | 233.0 | 228.0 | 224.0 | - | 4..3 | 29.3 | 57.1 | 85.0 | - | ||
| 1800 | 284.4 | 280.4 | 275.4 | 271.4 | - | 5.2 | 35.3 | 68.7 | 102.1 | - | ||
*50 The max intermittent pressure is 21MPa
<
| Series | Geological Displacement mL/rev | Rotation speed r/min | Flow (L/min) | Input Power (KW) | ||||||||
| P=0 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24 Mpa |
P=0.7 Mpa |
P=7 Mpa |
P=14 Mpa |
P=21 Mpa |
P=24.5 Mpa |
|||
| L/min | L/min | L/min | L/min | L/min | KW | KW | KW | KW | KW | |||
| T6E-042 | 132.3 | 1000 | 132.3 | 127.3 | 122.3 | 117.3 | 115.3 | 3.3 | 17.4 | 33.0 | 48.5 | 55.2 |
| 1200 | 158.8 | 153.8 | 148.8 | 143.8 | 141.8 | 4.0 | 20.8 | 39.5 | 58.3 | 66.3 | ||
| 1500 | 198.5 | 193.5 | 188.5 | 183.5 | 181.5 | 5.2 | 26.2 | 49.4 | 72.7 | 82.7 | ||
| 1800 | 238.1 | 233.1 | 228.1 | 223.1 | 221.1 | 6.4 | 31.5 | 59.4 | 87.3 | 99.4 | ||
| T6E-045 | 142.4 | 1000 | 142.4 | 137.4 | 132.4 | 127.4 | 125.4 | 3.5 | 18.6 | 35.3 | 52.1 | 59.3 |
| 1200 | 170.9 | 165.9 | 160.9 | 155.9 | 153.9 | 4.1 | 22.2 | 42.4 | 62.5 | 71.2 | ||
| 1500 | 213.6 | 208.6 | 203.6 | 198.6 | 196.6 | 5.4 | 27.9 | 52.9 | 78.0 | 88.8 | ||
| 1800 | 256.3 | 251.3 | 246.3 | 241.3 | 239.3 | 6.6 | 33.6 | 63.7 | 93.7 | 106.6 | ||
| T6E-050 | 158.5 | 1000 | 158.5 | 153.5 | 148.5 | 143.5 | 141.5 | 3.6 | 20.4 | 39.1 | 57.7 | 65.7 |
| 1200 | 190.2 | 185.2 | 180.2 | 175.2 | 173.2 | 4.3 | 24.5 | 46.9 | 69.3 | 78.9 | ||
| 1500 | 237.8 | 232.8 | 227.8 | 222.8 | 220.8 | 5.7 | 30.7 | 58.6 | 86.5 | 98.4 | ||
| 1800 | 285.3 | 280.3 | 275.3 | 270.3 | 268.3 | 6.9 | 37.0 | 70.4 | 103.9 | 118.2 | ||
| T6E-052 | 164.8 | 1000 | 164.8 | 159.8 | 154.8 | 149.8 | 147.8 | 3.7 | 21.2 | 40.6 | 59.9 | 68.2 |
| 1200 | 197.8 | 192.8 | 187.8 | 182.8 | 180.8 | 4.4 | 25.4 | 48.6 | 71.9 | 81.9 | ||
| 1500 | 247.2 | 242.2 | 237.2 | 232.2 | 230.2 | 5.8 | 31.8 | 60.8 | 89.8 | 102.2 | ||
| 1800 | 296.6 | 291.6 | 286.6 | 281.6 | 279.6 | 7.1 | 38.3 | 73.1 | 107.8 | 122.8 | ||
| T6E-057 | 179.8 | 1000 | 179.8 | 174.8 | 169.8 | 164.8 | 162.8 | 3.9 | 22.9 | 44.1 | 65.2 | 74.2 |
| 1200 | 215.8 | 210.8 | 205.8 | 200.8 | 198.8 | 4.6 | 27.5 | 52.8 | 78.2 | 89.1 | ||
| 1500 | 269.7 | 264.7 | 259.7 | 254.7 | 252.7 | 6.0 | 34.5 | 66.0 | 97.6 | 111.2 | ||
| 1800 | 323.6 | 318.6 | 313.6 | 308.6 | 306.6 | 7.4 | 41.5 | 79.4 | 117.3 | 133.6 | ||
| T6E-062 | 196.7 | 1000 | 196.7 | 191.7 | 186.7 | 181.7 | 179.7 | 4.1 | 24.9 | 48.0 | 71.1 | 81.0 |
| 1200 | 236.0 | 231.0 | 226.0 | 221.0 | 219.0 | 4.9 | 29.8 | 57.6 | 85.3 | 97.2 | ||
| 1500 | 295.1 | 290.1 | 285.1 | 280.1 | 278.1 | 6.3 | 37.4 | 71.9 | 106.5 | 121.3 | ||
| 1800 | 354.1 | 349.1 | 344.1 | 339.1 | 337.1 | 7.7 | 45.0 | 86.5 | 127.9 | 145.7 | ||
| T6E-066 | 213.3 | 1000 | 213.3 | 208.3 | 203.3 | 198.3 | 196.3 | 4.3 | 26.8 | 51.9 | 76.9 | 87.6 |
| 1200 | 256.0 | 251.0 | 246.0 | 241.0 | 239.0 | 5.1 | 32.2 | 62.2 | 92.3 | 105.2 | ||
| 1500 | 320.0 | 315.0 | 310.0 | 305.0 | 303.0 | 6.6 | 40.3 | 77.8 | 115.2 | 131.3 | ||
| 1800 | 383.9 | 378.9 | 373.9 | 368.9 | 366.9 | 8.1 | 48.5 | 93.4 | 138.4 | 157.7 | ||
| T6E-072 | 227.1 | 1000 | 227.1 | 222.1 | 217.1 | 212.1 | 210.1 | 4.4 | 28.4 | 55.1 | 81.7 | 93.1 |
| 1200 | 272.5 | 267.5 | 262.5 | 257.5 | 255.5 | 5.3 | 34.1 | 66.1 | 98.1 | 111.8 | ||
| 1500 | 340.7 | 335.7 | 330.7 | 325.7 | 323.7 | 6.9 | 42.7 | 82.6 | 122.5 | 139.6 | ||
| 1800 | 408.8 | 403.8 | 398.8 | 393.8 | 391.8 | 8.4 | 51.4 | 99.2 | 147.1 | 167.6 | ||
| T6E-085* | 269.0 | 1000 | 269.0 | 264.0 | - | - | - | 4.9 | 33.3 | - | - | - |
| 1200 | 322.8 | 317.8 | - | - | - | 5.9 | 40.0 | - | - | - | ||
| 1500 | 403.5 | 398.5 | - | - | - | 7.6 | 50.1 | - | - | - | ||
| 1800 | 484.2 | 479.2 | - | - | - | 9.2 | 60.2 | - | - | - | ||
| T7B | T7BS | T7D | T7DS | T7E | T7ES | T6C | T6D | T6E | |
| E | 38.1 | 38.1 | 38.1 | 38.1 | 52.3 | 52.3 | 38.1 | 38.1 | 52.3 |
| F | 82.3 | 82.3 | 87.4 | 87.4 | 110.0 | 110.0 | 82.3 | 87.4 | 110.0 |
| G | 168.5 | 168.5 | 184.9 | 184.9 | 225.3 | 225.3 | 161.6 | 184.9 | 225.3 |
| J1 | 100.0 | 101.6 | 125.0 | 127.0 | 125.0 | 127.0 | 101.6 | 127.0 | 127.0 |
| J2 | 99.967 | 101.55 | 124.937 | 126.095 | 124.937 | 129.095 | 101.55 | 126.095 | 126.095 |
| N | 140.0 | 146.0 | 180.0 | 181.0 | 180.0 | 181.0 | 146.1 | 181.0 | 181.0 |
| O | 174.5 | 174.5 | 212.4 | 212.4 | 213.0 | 231.0 | 174.5 | 212.4 | 213.0 |
| φP | 14.0 | 14.3 | 18.0 | 17.5 | 18.0 | 17.5 | 14.3 | 17.5 | 17.5 |
| Oil port | Flange | Install Dimensions(mm) | |||||||
| A1 | B1 | ∅C1 | D1 | T1 Thread | |||||
| T7B、T7BS | P | 01:3/4" | F06 | 22.2 | 47.6 | 19 | 76.2 | 3/8"-16UNCx19.0 | |
| 00:1" | F08 | 26.2 | 52.4 | 25.4 | |||||
| S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 1/2"-13UNCx22.4 | |||
| T7D、T7DS | P | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 | |
| S | 2" | F16 | 42.9 | 77.8 | 50.8 | 82.6 | 1/2"-13UNCx23.9 | ||
| T7E、T7ES | P | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 98.6 | 1/2"-13UNCx23.4 | |
| S | 3" | F24 | 61.9 | 106.4 | 76.2 | 98.6 | 5/8"-11UNCx24.0 | ||
| T6C | P | 1" | F08 | 26.2 | 52.4 | 25.4 | 76.2 | 3/8"-15UNCx19.0 | |
| S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 76.2 | 1/2"-13UNCx22.4 | ||
| T6D | P | 1-1/4" | F10 | 30.2 | 58.7 | 31.8 | 82.6 | 7/16"-14UNCx22.3 | |
| S | 2" | F16 | 42.9 | 77.8 | 50.8 | 82.6 | 1/2"13UNCx23.9 | ||
| T6E | P | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 98.6 | 1/2"-13UNCx23.4 | |
| S | 3" | F24 | 61.9 | 106.4 | 76.2 | 98.6 | 5/8"-11UNCx24.0 | ||
<
| Model | Shaft code |
Max torque (N.m) |
L1 | L2 | DIA | K1xK2 | H1 | M1 |
| T7B | 2 | ● | 70.0 | 40.0 | 25.0065/24.9935 | 8.00×7.00 | 28.22 | - |
| T7BS | 1 | ● | 71.4 | 38.1 | 22.225/22.200 | 6.35×6.30 | 24.95 | M8x16 |
| 3 | ● | 40.7 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 13T | - | |||
| 4 | ● | 45.5 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 15T | - | |||
| T7D | 5 | ● | 87.4 | 50.0 | 32.018/32.002 | 10.000×8.00 | 35.3 | M10xx20 |
| T7DS | 1 | ● | 83.6 | 49.3 | 31.750/31.700 | 7.94×7.89 | 35.27 | M10xx20 |
| 2 | ● | 73.2 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | ||
| 3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 77.7 | 48.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| T7E | 5 | ● | 90.0 | 60.0 | 38.018/38.002 | 10.00×8.00 | 41.3 | M10xx20 |
| T7ES | 1 | ● | 90.9 | 50.8 | 38.100/38.050 | 9.52×9.47 | 42.36 | M10xx20 |
| 2 | ● | 61.9 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | - | |
| 3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 62.2 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - | |||
| T6C | 1 | 275 | 71.4 | 38.1 | 22.225/22.200 | 6.35×6.30 | 24.95 | M8x16 |
| 2 | 238 | 58.2 | 31.7 | 22.225/22.200 | 4.76×4.71 | 24.53 | - | |
| 3 | 343 | 40.7 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 14T | - | |||
| 4 | ● | 45.5 | 24.5 | SAE J498b class1, Diametral pitch 16/32, 17T | - | |||
| T6D | 1 | ● | 83.6 | 49.3 | 31.750/31.700 | 7.94×7.89 | 35.27 | M10xx20 |
| 2 | 577 | 73.2 | 38.1 | 31.750/31.700 | 7.94×7.89 | 35.27 | - | |
| 3 | ● | 55.2 | 31.7 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 77.7 | 24.5 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| T6E | 1 | ● | 90.9 | 50.8 | 38.100/38.050 | M10xx20 | ||
| 2 | 577 | 61.9 | 38.1 | 31.750/31.700 | - | |||
| 3 | ● | 55.2 | 38.0 | SAE J498b class1, Diametral pitch 12/24, 14T | - | |||
| 4 | ● | 62.2 | 31.5 | SAE J498b class1, Diametral pitch 12/24, 17T | - | |||
● work at maxmimum flow and pressure
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Factory For T6 Series Single Pump Wholesale to Jordan, The product will supply to all over the world, such as: Accra, Pretoria, Malawi, Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Eunice from Provence - 2018.06.21 17:11
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By David from Swiss - 2018.12.14 15:26
