China New Product T7 Series Single pumps Wholesale to Sweden

Short Description:

High pressure and high performance dowel pin type vane pumps widely used for plastic machinery, casting machinery, metallurgy machinery, pressing machinery, refining machinery, construction machinery, marine-machinery. Features 1.With dowel pin vane structure, it can work in high pressure, low noise and long lifetime2.This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.3.As the vane pump adopts bilabial vane, it has hig...


Product Detail

Product Tags

Related Video

Feedback (2)

We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for Vickers Hydraulic Pump Dealers In Bangalore, Gerotor Vs Gear Oil Pump, Electric Hydraulic Pump For Dump Truck 4 Ton Lift, Our hugely specialized process eliminates the component failure and offers our consumers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
China New Product T7 Series Single pumps Wholesale to Sweden Detail:

High pressure and high performance dowel pin type vane pumps widely used for plastic machinery, casting machinery, metallurgy machinery, pressing machinery, refining machinery, construction machinery, marine-machinery.

Features

1.With dowel pin vane structure, it can work in high pressure, low noise and long lifetime
2.This vane pump can fit wide viscosity hydraulic medium, and be started at low temperature and worked at high temperature.
3.As the vane pump adopts bilabial vane, it has high oil pollution resistance and wide speed scope.

 

NO. Part Qty NO. Part Qty NO. Part Qty
1 Shaft 1 5 Cir Clip For Shaft 2 9 Cartridge Kit  1
2 Straight Key  1 6 Ball Bearing  1 10 Rear Cover 1
3 Front Cover 1 7 Cir Clip For Hole 1 11 Hexagon Head Bolt 4
4 Shaft Seal  1 8 Rectangle Seal Ring 1      

 < Model Designation

T7B S -B10 -1 R 00 -A 1 01
Series Type Code  Flow code Shaft 
type
Rotation Port positions Design
 number 
Sealing 
Level
Port 
dimensions
T7B

NO:

 ISO 3019 Installation Flange

S:

SAE J744 installation flange 

B02、B03、B04、B05、
B06、B07、B08、B10、
B12、B15
See of shaft (Views from shaft end of pump)

R-right hand for clockwise

L-left hand for counter-clockwise

(Views from shaft end of pump)
00-Opposite inlet port 01-Inline with inlet 
02-90°CCW from inlet 
03-90°CW from inlet
A 1-S1, 
NBR 
Nitrile rubber
5-S5, 
Fluororubber 
See 

installation

 dimensions 

T7D B14、B17、B20、B22、
B24、B28、B31、B35、
B38、B42
NO
T7E 042、045、050、052、
054、057、062、066、
072、085
T6C NO:

industrial type

M:

truck type

P:

truck type double seal kits

003/B03、005/B05、006/B06、008/B08、010/B10、012/B12、014/B14、017/B17、020/B20、022/B22、025/B25、028/B28、031/B31
T6D 014/B14、017/B17、020/B20、024/B24、028/B28、031/B31、035/B35、038/B38、042/B42、045/B45、050/B50、061
T6E 042、045、050、052、
057、062、066、072、085

003/B03: In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate structure.

< Technical Data

Series  Flow code
(Usgpm)
Geometric displace-ment mL/r  Max. pressure Mpa Max. speed r/min Min. speed r/min
Antiwear 
hydraulic oil 
Genneral hydraulic oil or phosphate eater fluid Water glycol fluid or water-oil emulsions

Genneral hydraulic

oil or phosphate eater fluid or antiwear hydraulic oil 

Water glycol

fluid or phosphate eater fluid or  water-oil emulsions

Instant  Continuous  Instant  Continuous  Instant  Continuous 
T7B(S) B02 5.8  35 32 24 21 17.5 14 3600 1800 600
B03 9.8 
B04 12.8 
B05 15.9 
B06 19.8 
B07 22.5 
B08 24.9 
B10 31.8 
B12 41.0  30 27.5 3000
B15 50.0  28 24
T7D(S) B14 44.0  30 25 24 21 17.5 14 3000 1800 600
B17 55.0 
B20 66.0 
B22 70.3 
B24 81.1 
B28 90.0 
B31 99.2 
B35 113.4  28 2800
B38 120.6 
B42 137.5  26 23 2500
T7E(S) 042 132.3  25 21 21 17.5 17.5 14 2200 1800 600
045 142.4 
050 158.5 
052 164.8 
054 171.0 
57 183.3 
062 196.7 
066 213.3 
072 227.1 
085 268.7  9 7.5 7.5 7.5 7.5 7.5 2000

003/B03: In displacement code, 0 means single steering valve plate structure, B means the two steering valve plate strucrure.
 <Operation Performance

Using the anti-wear hydraulic oil, the oil viscosity 24cst.

Series 

Geological

Displacement mL/rev

Rotation

speed r/min 

Flow (L/min) Input Power (KW)
P=0
Mpa 
P=7
Mpa 
P=14
Mpa 
P=21
Mpa 
P=24
Mpa 
P=28
Mpa 
P=32
Mpa 
P=0.7
Mpa 
P=7
Mpa 
P=14
Mpa 
P=21
Mpa 
P=24
Mpa 
P=28
Mpa 
P=32
Mpa 
L/min L/min L/min L/min L/min L/min L/min KW KW KW KW KW KW KW
T7B(S)-B02 5.8 1000 5.8  4.9  4.2  3.3  - - - 0.2  0.9  1.7  2.5  - - -
1200 7.0  6.1  5.4  4.5  4.0  - - 0.4  1.3  2.2  3.2  3.6  - -
1500 8.7  7.8  7.1  6.2  5.7  5.2  4.7  0.6  1.7  2.8  4.0  4.5  5.2  5.9 
1800 10.4  9.5  8.8  7.9  7.4  6.9  6.4  0.7  2.0  3.4  5.0  5.6  6.4  7.2 
T7B(S)-B03 9.8 1000 9.8  8.9  8.2  7.3  6.8  6.3  5.8  0.2  1.3  2.6  3.9  4.5  5.2  6.0 
1200 11.8  10.9  10.2  9.3  8.8  8.3  7.8  0.4  1.8  3.3  4.9  5.5  6.4  7.3 
1500 14.7  13.8  13.1  12.2  11.7  11.2  10.7  0.7  2.4  4.2  6.1  6.9  8.0  9.1 
1800 17.6  16.7  16.0  15.1  14.6  14.1  13.6  0.8  2.8  5.1  7.5  8.5  9.7  11.0 
T7B(S)-B04 12.8 1000 12.8  11.9  11.2  10.3  9.8  9.3  8.8  0.2  1.7  3.3  5.0  5.7  6.6  7.6 
1200 15.4  14.5  13.8  12.9  12.4  11.9  11.4  0.5  2.2  4.2  6.1  6.9  8.1  9.2 
1500 19.2  18.3  17.6  16.7  16.2  15.7  15.2  0.7  2.9  5.3  7.7  8.7  10.1  11.5 
1800 23.0  22.1  21.4  20.5  20.0  19.5  19.0  0.9  3.4  6.4  9.4  10.6  12.3  13.9 
T7B(S)-B05 15.9 1000 15.9  15.0  14.3  13.4  12.9  12.4  11.9  0.3  2.1  4.1  6.0  6.9  8.1  9.2 
1200 19.1  18.2  17.5  16.6  16.1  15.6  15.1  0.5  2.7  5.0  7.4  8.4  9.8  11.2 
1500 23.9  23.0  22.3  21.4  20.9  20.4  19.9  0.8  3.4  6.4  9.3  10.6  12.3  14.0 
1800 28.6  27.7  27.0  26.1  25.6  25.1  24.6  0.9  4.1  7.7  11.3  12.8  14.9  16.9 
T7B(S)-B06 19.8 1000 19.8  18.9  18.2  17.3  16.8  16.3  15.8  0.3  2.5  5.0  7.4  8.5  9.9  11.3 
1200 23.8  22.9  22.2  21.3  20.8  20.3  19.8  0.6  3.2  6.1  9.1  10.3  12.0  13.7 
1500 29.7  28.8  28.1  27.2  26.7  26.2  25.7  0.8  4.1  7.7  11.4  12.9  15.0  17.1 
1800 35.6  34.7  34.0  33.1  32.6  32.1  31.6  1.0  4.9  9.3  13.8  15.7  19.1  20.6 
T7B(S)-B07 22.5 1000 22.5  21.6  20.9  20.0  19.5  19.0  18.5  0.4  2.8  5.6  8.3  9.6  11.2  12.8 
1200 27.0  26.1  25.4  24.5  24.0  23.5  23.0  0.6  3.6  6.9  10.2  11.6  13.5  15.4 
1500 33.8  32.9  32.2  31.3  30.8  30.3  29.8  0.9  4.6  8.7  12.8  14.6  16.9  19.3 
1800 40.5  39.6  38.9  38.0  37.5  37.0  36.5  1.1  5.5  10.5  15.5  17.6  20.4  23.2 
T7B(S)-B08 24.9 1000 24.9  24.0  23.3  22.4  21.9  21.4  20.9  0.4  3.1  6.2  9.2  10.5  12.3  14.0 
1200 29.9  29.0  28.3  27.4  26.9  26.4  25.9  0.6  3.9  7.6  11.2  12.8  14.8  16.9 
1500 37.4  36.5  35.8  34.9  34.4  33.9  33.4  0.9  5.0  9.5  14.1  16.0  18.6  21.2 
1800 44.8  43.9  43.2  42.3  41.8  41.3  40.8  1.1  6.0  11.5  17.0  19.3  22.4  25.5 
T7B(S)-B10 31.8 1000 31.8  30.9  30.2  29.3  28.8  28.3  27.8  0.5  3.9  7.8  11.6  13.3  15.5  17.7 
1200 38.2  37.3  36.6  35.7  35.2  34.7  34.2  0.7  4.9  9.5  14.1  16.1  18.7  21.4 
1500 47.7  46.8  46.1  45.2  44.7  44.2  43.7  1.1  6.2  11.9  17.7  20.1  23.4  26.7 
1800 57.2  56.3  55.6  54.7  54.2  53.7  53.2  1.3  7.4  14.4  21.3  24.3  28.2  32.1 
T7B(S)-B12 41.0  1000 41.0  40.1  39.4  38.5  38.0  37.5  - 0.6  5.0  9.9  14.8  17.0  19.8  -
1200 49.2  48.3  47.6  46.7  46.2  45.7  - 0.9  6.2  12.1  18.0  20.5  23.9  -
1500 61.5  60.6  59.9  59.0  58.5  58.0  - 1.2  7.8  15.2  22.5  25.7  29.9  -
1800 73.8  72.9  72.2  71.3  70.8  70.3  - 1.5  9.4  18.2  27.1  30.9  35.9  -
T7B(S)-B15 50.0  1000 50.0  49.1  48.4  47.5  47.0  46.5  - 0.7  6.0  12.0  18.0  20.6  24.0  -
1200 60.0  59.1  58.4  57.5  57.0  56.5  - 1.0  7.4  14.6  21.7  24.8  28.9  -
1500 75.0  74.1  73.4  72.5  72.0  71.5  - 1.4  9.4  18.3  27.2  31.1  36.2  -
1800 90.0  89.1  88.4  87.5  87.0  86.5  - 1.7  11.3  22.0  32.8  37.4  43.5  -

<

Series  Geological Displacement mL/rev Rotation speed r/min  Flow (L/min)
P=0
Mpa 
P=14
Mpa 
P=30
Mpa 
L/min L/min L/min
T7D(S)-B14 44.0  1000 44.0  37.4  29.9 
1200 52.8  46.2  38.7 
1500 66.0  59.4  51.9 
1800 79.2  72.6  65.1 
T7D(S)-B17 55.0  1000 55.0  48.4  40.9 
1200 66.0  59.4  51.9 
1500 82.5  75.9  68.4 
1800 99.0  92.4  84.9 
T7D(S)-B20 66.0  1000 66.0  59.4  51.9 
1200 79.2  72.6  65.1 
1500 99.0  92.4  84.9 
1800 118.8  112.2  104.7 
T7D(S)-B22 70.3  1000 70.3  63.7  56.2 
1200 84.4  77.8  70.3 
1500 105.5  98.8  91.4 
1800 126.5  119.9  112.4 
T7D(S)-B24 81.1  1000 81.1  74.5  67.0 
1200 97.3  90.7  83.2 
1500 121.7  115.1  107.6 
1800 146.0  139.4  131.9 
T7D(S)-B28 90.0  1000 90.0  83.4  75.9 
1200 108.0  101.4  93.9 
1500 135.0  128.4  120.9 
1800 162.0  155.4  147.9 
T7D(S)-B31 99.2  1000 99.2  92.6  85.1 
1200 119.8  113.2  105.7 
1500 148.8  142.2  134.7 
1800 178.6  172.0  164.5 
T7D(S)-B35 113.4  1000 113.4  106.8  -
1200 136.1  129.5  -
1500 170.1  163.5  -
1800 204.1  197.5  -
T7D(S)-B38 120.6  1000 120.6  114.0  -
1200 144.7  138.1  -
1500 180.9  174.3  -
1800 217.1  210.5  -
T7D(S)-B42 137.5  1000 137.5  130.9  -
1200 165.0  158.4  -
1500 206.3  199.7  -
1800 247.5  240.9  -

<

Series  Input Power (KW)
P=0.7
Mpa 
P=14
Mpa 
P=30
Mpa 
KW KW KW
T7D(S)-B14 1.5  16.6  34.2 
T7D(S)-B17 1.7 20.4 42.4 
T7D(S)-B20 1.9 24.3 50.7 
T7D(S)-B22 2.0  25.8 53.9 
T7D(S)-B24 2.2 29.5 62.0 
T7D(S)-B28 2.3 32.7 68.7 
T7D(S)-B31 2.5 35.9 75.6 
T7D(S)-B35 2.7 40.8 -
T7D(S)-B38 2.9 43.4 -
T7D(S)-B42 3.2 49.3 -

<

Series  Geological Displacement mL/rev Rotation speed r/min  Flow (L/min)
P=0
Mpa 
P=14
Mpa 
P=24
Mpa 
L/min L/min L/min
T7E(S)-042 132.3 1000 132.3  122.3  115.2 
1200 158.8  150.8  143.7 
1500 198.5  188.5  181.4 
1800 238.1  228.1  221.0 
T7E(S)-045 142.4 1000 142.4  132.4  125.3 
1200 170.9  160.9  153.8 
1500 213.6  203.6  196.5 
1800 256.3  246.3  239.2 
T7E(S)-050 158.5 1000 158.5  158.5  141.4 
1200 190.2  180.2  173.1 
1500 237.7  227.7  220.6 
1800 285.3  275.3  268.2 
T7E(S)-052 164.8 1000 164.8  154.8  147.7 
1200 197.8  187.8  180.7 
1500 247.2  237.2  230.1 
1800 296.6  286.6  279.5 
T7E(S)-054 171.0  1000 171.0  161.0  153.9 
1200 205.2  195.2  188.1 
1500 256.5  246.5  239.4 
1800 307.8  297.8  290.7 
T7E(S)-057 183.3 1000 183.3  173.3  166.2 
1200 220.0  210.0  202.9 
1500 275.0  265.0  257.9 
1800 330.0  320.0  312.9 
T7E(S)-062 196.7 1000 196.7  186.7  179.6 
1200 236.0  226.0  218.9 
1500 295.0  285.0  277.9 
1800 354.1  344.1  337.0 
T7E(S)-066 213.3 1000 213.3  203.3  196.2 
1200 256.0  246.0  238.9 
1500 319.9  309.0  302.8 
1800 354.1  344.1  337.0 
T7E(S)-072 227.1 1000 227.1  217.1  210.0 
1200 272.5  262.5  255.4 
1500 340.6  330.6  323.5 
1800 408.8  398.8  391.7 
T7E(S)-085* 268.7 1000 268.7  - -
1200 322.4  - -
1500 403.0  - -
1800 483.7  - -

*85: The max rotation speed is 2000r/min, and the max intermittent pressure is 21MPa

<

Series  Input Power (KW)
P=0
Mpa 
P=14
Mpa 
P=24
Mpa 
KW KW KW
T7E(S)-042 5.2 49.4 82.6 
T7E(S)-045 5.4 52.9 88.7 
T7E(S)-050 5.7 58.5 50.7 
T7E(S)-052 5.8 60.8 102.1 
T7E(S)-054 5.9 63 105.8 
T7E(S)-057 6.1 67.3 113.2 
T7E(S)-062 6.4 71.9 121.3 
T7E(S)-066 6.7 77.7 131.2 
T7E(S)-072 6.9 82.6 139.5 
T7E(S)-085 9.1 - -

*85: The max rotation speed is 2000rpm/min, and the max intermittent pressure is 21Mpa

Installation Dimensions

T7B  T7BS T7D T7DS T7E T7ES T6C T6D T6E
E 38.1  38.1  38.1  38.1  52.3  52.3  38.1  38.1  52.3 
F 82.3  82.3  87.4  87.4  110.0  110.0  82.3  87.4  110.0 
G 168.5 168.5 184.9 184.9 225.3 225.3 161.6 184.9 225.3
J1 100.0  101.6  125.0  127.0  125.0  127.0  101.6  127.0  127.0 
J2 99.967 101.55 124.937 126.095 124.937 129.095 101.55 126.095 126.095
N 140.0  146.0  180.0  181.0  180.0  181.0  146.1  181.0  181.0 
O 174.5  174.5  212.4  212.4  213.0  231.0  174.5  212.4  213.0 
φP 14.0  14.3  18.0  17.5  18.0  17.5  14.3 17.5 17.5

Oil port  Flange Install Dimensions(mm) 
A1 B1 ∅C1 D1 T1 Thread 
T7B、T7BS P 01:3/4" F06 22.2 47.6 19 76.2 3/8"-16UNCx19.0
00:1" F08 26.2 52.4 25.4
S 1-1/2" F12 35.7 69.9 38.1 1/2"-13UNCx22.4
T7D、T7DS P 1-1/4" F10 30.2 58.7 31.8 82.6 7/16"-14UNCx22.3
S 2" F16 42.9 77.8 50.8 82.6 1/2"-13UNCx23.9
T7E、T7ES P 1-1/2" F12 35.7 69.9 38.1 98.6 1/2"-13UNCx23.4
S 3" F24 61.9 106.4 76.2 98.6 5/8"-11UNCx24.0
T6C P 1" F08 26.2 52.4 25.4 76.2 3/8"-15UNCx19.0
S 1-1/2" F12 35.7 69.9 38.1 76.2 1/2"-13UNCx22.4
T6D P 1-1/4" F10 30.2 58.7 31.8 82.6 7/16"-14UNCx22.3
S 2" F16 42.9 77.8 50.8 82.6 1/2"13UNCx23.9
T6E P 1-1/2" F12 35.7 69.9 38.1 98.6 1/2"-13UNCx23.4
S 3" F24 61.9 106.4 76.2 98.6 5/8"-11UNCx24.0

<

Model  Shaft 
code 
Max torque
 (N.m)
L1 L2 DIA K1xK2 H1 M1
T7B 2 70.0  40.0  25.0065/24.9935 8.00×7.00 28.22 -
T7BS 1 71.4  38.1  22.225/22.200 6.35×6.30 24.95 M8x16
3 40.7  24.5  SAE J498b class1, Diametral pitch 16/32, 13T -
4 45.5  24.5  SAE J498b class1, Diametral pitch 16/32, 15T -
T7D 5 87.4  50.0  32.018/32.002 10.000×8.00 35.3 M10xx20
T7DS 1 83.6  49.3  31.750/31.700 7.94×7.89 35.27 M10xx20
2 73.2  38.1  31.750/31.700 7.94×7.89 35.27
3 55.2  38.0  SAE J498b class1, Diametral pitch 12/24, 14T -
4 77.7  48.0  SAE J498b class1, Diametral pitch 12/24, 14T -
T7E 5 90.0  60.0  38.018/38.002 10.00×8.00 41.3 M10xx20
T7ES 1 90.9  50.8  38.100/38.050 9.52×9.47 42.36 M10xx20
2 61.9  38.1  31.750/31.700 7.94×7.89 35.27 -
3 55.2  38.0  SAE J498b class1, Diametral pitch 12/24, 14T -
4 62.2  31.5  SAE J498b class1, Diametral pitch 12/24, 17T -
T6C 1 275 71.4  38.1  22.225/22.200 6.35×6.30 24.95 M8x16
2 238 58.2  31.7  22.225/22.200 4.76×4.71 24.53 -
3 343 40.7  24.5  SAE J498b class1, Diametral pitch 16/32, 14T -
4 45.5  24.5  SAE J498b class1, Diametral pitch 16/32, 17T -
T6D 1 83.6  49.3  31.750/31.700 7.94×7.89 35.27 M10xx20
2 577 73.2  38.1  31.750/31.700 7.94×7.89 35.27 -
3 55.2  31.7  SAE J498b class1, Diametral pitch 12/24, 14T -
4 77.7  24.5  SAE J498b class1, Diametral pitch 12/24, 14T -
T6E 1 90.9  50.8  38.100/38.050 M10xx20
2 577 61.9  38.1  31.750/31.700 -
3 55.2  38.0  SAE J498b class1, Diametral pitch 12/24, 14T -
4 62.2  31.5  SAE J498b class1, Diametral pitch 12/24, 17T -

● work at maxmimum flow and pressure


Product detail pictures:

China New Product  T7 Series  Single pumps Wholesale to Sweden detail pictures

China New Product  T7 Series  Single pumps Wholesale to Sweden detail pictures

China New Product  T7 Series  Single pumps Wholesale to Sweden detail pictures


Related Product Guide:
Why every website owner needs Google Analytics

While in the past few years, our organization absorbed and digested innovative technologies both equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted for the advancement of China New Product T7 Series Single pumps Wholesale to Sweden, The product will supply to all over the world, such as: belarus, Victoria, Australia, We follow superior mechanism to process these products that ensure optimum durability and reliability of the products. We follow latest effective washing and straightening processes that allow us to offer unmatched quality of products for our clients. We continually strive for perfection and all our efforts are directed towards attaining complete client satisfaction.
  • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Madeline from Sheffield - 2018.05.15 10:52
    Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Muriel from Hungary - 2017.08.21 14:13

    Related Products

    WhatsApp Online Chat !