100% Original PV2R Series Double Vane Pump to Jamaica Factory
100% Original PV2R Series Double Vane Pump to Jamaica Factory Detail:
Product Introduction
PV2R series of vane pumps with high pressure and lower noise are high-performance products, which are developed and domestically produced by our company, featured by advanced performance, reasonable structure, good creditability, lower noise, ultra-low pulse and stable quality and so on. Precisely made, the product can be used in the equipment with high precision and low noise, and is widely used in cutting, plastic, leather, forging and engineering machinery fields, and the like.
Specifications / Single pump
Model | Displace ment (mL/r) |
Max. pressure (Mpa) | Speed (r/min) | Input power (kw) |
|||
Special oil | Antiwear oil | Common oil | Min. | Max. | |||
PV2R1-4 | 4.3 | 21 | 17.5 | 16 | 750 | 1800 | 2.1 |
PV2R1-6 | 6.5 | 3.2 | |||||
PV2R1-8 | 8.5 | 4.5 | |||||
PV2R1-10 | 10.8 | 5.4 | |||||
PV2R1-12 | 12.8 | 6.1 | |||||
PV2R1-14 | 14.5 | 6.9 | |||||
PV2R1-17 | 16.2 | 7.9 | |||||
PV2R1-19 | 20.1 | 9.6 | |||||
PV2R1-23 | 22.5 | 10.5 | |||||
PV2R1-25 | 25.3 | 12.5 | |||||
PV2R1-28 | 29.6 | 14.0 | |||||
PV2R1-31 | 32.3 | 16 | 16 | 15.5 | |||
PV2R2-26 | 25.3 | 21 | 17.5 | 14 | 600 | 1800 | 11.7 |
PV2R2-33 | 32.3 | 15.5 | |||||
PV2R2-41 | 39.8 | 18.9 | |||||
PV2R2-47 | 49.8 | 23.2 | |||||
PV2R2-53 | 51.5 | 24.0 | |||||
PV2R2-59 | 55.8 | 24.9 | |||||
PV2R2-65 | 63.7 | 29.4 | |||||
PV2R2-70 | 70.3 | 16 | 1200 | 31.6 | |||
PV2R2-79 | 78.1 | 35.7 | |||||
PV2R2-85 | 82.7 | 37.5 | |||||
PV2R3-52 | 51.5 | 21 | 17.5 | 14 | 600 | 1800 | 23.2 |
PV2R3-60 | 63.7 | 29.4 | |||||
PV2R3-66 | 66.6 | 34.2 | |||||
PV2R3-76 | 75.5 | 37.7 | |||||
PV2R3-94 | 89.5 | 41.2 | |||||
PV2R3-116 | 118 | 16 | 16 | 1200 | 50.0 | ||
PV2R3-125 | 122.2 | 59.9 | |||||
PV2R3-136 | 136 | 66.7 |
Note:
1. When pressure of pumps exceeds 16Mpa, with displacement of "4" "6" "8", speed should be more than 1450r/min.
2. Reduce the negative pressure of the inlet when the single pumps or double pumps with large displacement at high speed.
3. In use of synthetic hydraulic fluids and water containing hydraul fluids, limit the max speed at 1200r/min.
4. Noisiness is available in working conditions of 14Mpa and 1200r/min.
5. Input power is available in working condition of 16Mpa and 1500r/min.
Series | Displacement of shaft end pump | Displacement of cover end pump | ||||||
PV2R21 | 26、33、41、47、53、59、65 | 4、6、8、10、12、14、17、19、23、25、28、31 | ||||||
PV2R31 | 52、60、66、76、94、116、125、136 | 4、6、8、10、12、14、17、19、23、25、28、31 | ||||||
PV2R32 | 52、60、66、76、94、116、125、136 | 26、33、41、47、53、59、65 |
Port flange kits
Flange model | Corresponding pipe specification |
Dimensions mm | ||||||||||
C | D | E | F | H | J | L | N | Q | T | |||
F04-A | 1/2" | 40 | 54 | 17.5 | 38.1 | 9.0 | 27 | Rc1/2" | - | - | 13 | |
F04-B | - | 11 | 22.5 | |||||||||
F06-A | 3/4' | 50.5 | 65.5 | 22.2 | 47.6 | 11.0 | 28 | Rc3/4" | - | - | 19 | |
F06-B | - | 12 | 28.5 | |||||||||
F08-A | 1" | 56 | 71 | 26.2 | 52.4 | 11.0 | 30 | Rc1" | - | - | 26 | |
F08-B | - | 14 | 34.5 | |||||||||
F10-A | 1-1/4" | 64.5 | 79.5 | 30.2 | 58.7 | 12.0 | 32 | Rc1-1/4" | - | - | 32 | |
F10-B | - | 16 | 43 | |||||||||
F12-A | 1-1/2" | 71 | 94 | 35.7 | 69.9 | 13.8 | 37 | Rc1-1/2" | - | - | 38 | |
F12-B | - | 18 | 49.1 | |||||||||
F16-A | 2" | 87.5 | 103 | 42.9 | 77.8 | 13.8 | 38 | Rc2" | - | - | 51 | |
F16-B | - | 20 | 61 | |||||||||
F20-A | 2-1/2" | 96 | 115 | 50.8 | 88.9 | 13.8 | 32 | Rc2-1/2" | - | - | 63 | |
F20-B | - | 22 | 77.1 | |||||||||
F24-A | 3" | 123 | 136 | 61.9 | 106.4 | 17.0 | 45 | Rc3" | - | - | 76 | |
F24-B | - | 25 | 90 | |||||||||
F28-A | 3-1/2" | 135 | 153 | 69.9 | 120.7 | 17.5 | 46 | Rc3-1/2" | - | - | 89 | |
F28-B | - | 20 | 102.8 | |||||||||
F32-A | 4" | 145 | 162 | 77.8 | 130.2 | 17.0 | 50 | Rc4" | - | - | 102 | |
F32-B | 40 | - | 28 | 115.5 |
Flange model | O Ring GB3452.1-2005 |
PV2R Series | ||||
socket head screw | Dimesions K | Corresponding oil pump interface |
||||
F04-A | 21.2×2.65 | M8x30mm | 12.5 | PVR1 outlet, PV2R21, PV2R31 outlet of cover end pump |
||
F04-B | ||||||
F06-A | 30×3.55 | M10x30mm | 12.5 | PVR2 outlet, PV2R21 outlet of shaft end pump PV2R32 outlet of cover end pump |
||
F06-B | ||||||
F08-A | 34.5×3.55 | M10x35mm | 17 | PVR1 inlet port | ||
F08-B | ||||||
F10-A | 40×3.55 | M10x40mm | 19 | PVR2 inlet port, PV2R3 outlet, PV2R31, PV2R32 outlet of shaft end pump |
||
F10-B | ||||||
F12-A | 50×3.55 | - | - | - | ||
F12-B | ||||||
F16-A | 65×3.55 | M12x45mm | 17.5 | PVR3, PV2R21 inlet | ||
F16-B | ||||||
F20-A | 75×3.55 | - | - | - | ||
F20-B | ||||||
F24-A | 85×3.55 | M16x45mm | 16.5 | PVR31, PV2R32 inlet | ||
F24-B | ||||||
F28-A | 100×3.55 | - | - | - | ||
F28-B | ||||||
F32-A | 115×3.55 | - | - | - | ||
F32-B |
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
No matter new customer or old customer, We believe in long term and trusted relationship for 100% Original PV2R Series Double Vane Pump to Jamaica Factory, The product will supply to all over the world, such as: Mozambique, Madrid, Spain, We warmly welcome you to come to visit us personally. We hope to establish a long-term friendship based on equality and mutual benefit. If you want to get in touch with us, please do not hesitate to call. We will be your best choice.
By Hazel from Honduras - 2018.12.14 15:26
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Daphne from UK - 2017.02.14 13:19